I have been parting my turbo car out for a couple months and have quite a few things left. I'm just going to keep updating this thread with parts as I get them prepared to be sold. Pictures will be posted at the bottom of this first post. Prices will be in bold at the end of each listing.
1. Black Cobra R wheels - 17x9, 17x10.5 the back tires are 315/35/17 Nitto 555rs that are pretty bald. If I were keeping them I'd finish the summer with them but they are certainly on the way out. Fronts are Continental Extreme Contact 245/45zr17 that have about 6/32nds, so plenty of life. They are all in decent shape, not show quality but good. The one rear has some clear peeling, I just never cared enough to fix it. 400
2. 94/95 front spindles - SOLD
3. UPR coilovers on KYB GR2 struts - SOLD
4. Convertible styling bar - White styling bar for a 94-98 car; it does not have a light. Its just the bar, I'm sure the kit comes with more hardware and such and the price will reflect it. I'm going to attempt to remove the mounting brackets but if not, I'm sure you can buy them from the manufacturer. 100
5. Convertible speedster cover - One piece speedster cover painted white. I'm not sure of the manufacturer nut its great quality. The black vinyl in the front has a few air bubbles but it never bothered me. 250
6. DND Racing/Sport seats - SOLD
7. 3" wide cowl hood - This hood is fiberglass, has front hood pin provisions, for a 94-98 car, and is painted white. I am unsure of the manufacturer. I bought it damaged and repaired it with my girlfriends Grandfather who owned a Corvette fiberglass shop for 20 years. That being said, I did most of the repairs and it is about an 8/10. If you know nothing about body work, it looks perfect. If you know what to look for, imperfections can definitely be spotted. There is also a square hole cut in the underneath to fit my relocated radiator cap, it is not noticeable from the outside whatsoever. 130
8. Maximum Motorsports CC plates - These are the 4 bolt Caster/Camber plates for a 94-04 car. Painted black. 125
9. Accufab 75mm "Race" throttle body - SOLD
10. Spec Stage 3+ clutch - It is 10.5" in diameter and 26 spline. I used it with a 157 tooth flywheel, Quicktime bell, t56 on a Windsor. It is rated at 800 Ftlb. I bought it with 150 miles and put about 300 miles and 14 dyno pulls on it. The pressure plate is kinda rough looking because I took it in and out about 10 times. 150
11. Billet steel flywheel - SOLD
12. SN95 corner lights - SOLD
13. 60mm wastegate - I have an Ebay 60mm wastegate for sale. It only has idle time on it. Comes with all the springs, does not come with flange. 80
I have many random 94-04 interior pieces. Red/Black convertible. This includes factory seats, door panels, center consol, dash, etc. Just ask.
Reply With Quote
Bookmarks