Something new

[Martin0660]

We havent had much going on in here lately, so I thought I would post something ;) Got my baseline passes last weekend, nothing impressive, just a buch of 12.55-12.62 passes (at 107.5). I need to find where the MPH went as I was running 110 last year. I wasnt so much worried about ET or MPH saturday, but was thrilled that the car hooked okay and went straight. I geuss all of the torque box welding SFC's and eiback launch springs paid off.



Tonight I swapped in the A237 Cam. It idles with 11" of vacuum, and has a strong lope. Sounds pretty neat for a 4 cyclinder ;)

I have it straight up right now, and it pulls real well (to the limiter). I will go to TnT Saturday and start working through the cam timing to find a sweet spot. We will see what its worth at the track :D

Bob Myers

[lib88stang]

Very cool Bob, how much of a difference is between the ranger roller and the A237?

[Martin0660]

I geuss we will find out Saturday :D Its a little freaky, it pull way hard up top, we will see what its worth, if nothing else it sounds mean :D really, I dont think there is a lot of power to be found in a cam with these things, just my opinion.

The other thing you have to rember with mine right now, the turbine is probably my choke point right now, and until I do something about that, none of this may show a big difference. Eh, going to test the cam this weekend, then swap over to the 65 MM TB and 3" intercooler piping next week.

Bob Myers

Bob Myers

[turbo83coupe]

Its sweet!! Wait till you hear it idle I got to hear it :D

[George C]

nice sidewall wrinkle man

[yeahloh95]

cool i can't wait to hear it

[fast4ord]

Cool Bob,

[Martin0660]

Thanks guys, we will see what the cam is really worth this weekend. Butt dyno say a little ;)

Bob Myers