Slowsix's project 3pointh8

[SlowSix]

Well, paid a deposit on the new motor this week.
Should be done in a couple months.

Decided on some parts to go with the motor
On the hunt for a kb or preferably jmax powermax fuel pump booster.
Going to get id850s or fuel injector development 1000cc injectors.
Sct ba5000 maf since the car has a slot maf already.

Going to bite the bullet on an SFI flywheel - spec billet steel.
This flywheel accepts a 10.5" clutch so I will be going with a ram power grip HD 10.5" 26 spline clutch.

I am thinking I may run out of fuel pump (dw300m 340 lph pump) even with the boost of pump.
Searching for 550 on pump 93 out of the new motor. Going to try to keep it under 20 psi.

Aside from the motor, supporting fuel, and new clutch/flywheel, the rest of the car is going to essentially stay the same.

[PaxtonShelby]

Keep plugging away. These things take forever unless you are Bob or Sutyak.

[sutyak]

All good stuff. Why no ID1000's? Cost? Call up a local shop and ask for a discount.

[SlowSix]

Keep plugging away. These things take forever unless you are Bob or Sutyak.

I really don't think it should take too long. Basically all I have to do is pull the front part of the turbo kit off, pull the motor, and then drop the new one in and reassemble.

All good stuff. Why no ID1000's? Cost? Call up a local shop and ask for a discount.

Cost, yeah. I really shouldn't need a 1000cc injector, but Tim said the Siemens deka 80# injectors are a pain to tune. The 60s I'm afraid I might run out of fuel. A set of 8 id1000s is about $1100.
a dealer on a fb group said they no longer make id850s which I though was weird.

[sutyak]

Call a dealer. You can get just 6.

[SlowSix]

Call a dealer. You can get just 6.

I talked to a guy on FB actually. $730 for 6 id 1050x

[wick]

I really don't think it should take too long. Basically all I have to do is pull the front part of the turbo kit off, pull the motor, and then drop the new one in and reassemble.



Cost, yeah. I really shouldn't need a 1000cc injector, but Tim said the Siemens deka 80# injectors are a pain to tune. The 60s I'm afraid I might run out of fuel. A set of 8 id1000s is about $1100.
a dealer on a fb group said they no longer make id850s which I though was weird.

Be thankful you don't have a diesel and put injectors in it. North of $4000.

[SlowSix]

Just ordered a clutch, some more exhaust wrap (going to get rid of the terrible fiberglass stuff that is on my crossover pipe), and some DUI 10mm livewires.

Aside from the motor, the list is now down to
-spec billet steel flywheel (sfi rated)
-injectors
- boost a pump
- maf

I don't believe anyone makes a blow proof bell for a v6

[SlowSix]

Be thankful you don't have a diesel and put injectors in it. North of $4000.

I cant even afford a diesel in the first place. New diesel truck prices are crazy.

[Martin0660]

I really like my injectors from FID. Stinger has good prices and the dead times provided made them plug and play for me.

im running 1300's on mine and even in batch fire they idle better than I thought possible (and only 75% DC under load)

[SlowSix]

I really like my injectors from FID. Stinger has good prices and the dead times provided made them plug and play for me.

im running 1300's on mine and even in batch fire they idle better than I thought possible (and only 75% DC under load)

Good to know, thanks for the input Bob.
The ID stuff is priced crazy. If I can get 6 fid 1000 for like $500 I'd be very happy with that.

[Martin0660]

The guy at FID worked at ID

[somethingclever]

ID1000/FID1050 need Holley 750DP.

[SlowSix]

ID1000/FID1050 need Holley 750DP.

carbureted v6, I would be doing it ALL wrong.

[SlowSix]

Parts starting to come in. Haven't heard much about my motor as of late.

Ram power grip HD clutch, some new exhaust wrap, and DUI livewires 10mm plug wires.

Ordered a spec billet steel flywheel as well but it hasn't shipped yet.

[wick]

Make sure you wear good rubber/latex gloves when you do the wrap. That stuff leaves your finger nails black for a while till it wears off.

[SlowSix]

Make sure you wear good rubber/latex gloves when you do the wrap. That stuff leaves your finger nails black for a while till it wears off.

This is the lava wrap stuff. I never noticed it making my hands my black before.
I have the old school fiberglass stuff on my crossover pipe right now and it is terrible.

[wick]

This is the lava wrap stuff. I never noticed it making my hands my black before.
I have the old school fiberglass stuff on my crossover pipe right now and it is terrible.

I have never used that before. How does it hold up?
I always got the DEI stuff. The black always bleeds when you wet it. Drives you nuts! Haha

[SlowSix]

I have never used that before. How does it hold up?
I always got the DEI stuff. The black always bleeds when you wet it. Drives you nuts! Haha

I like it.
It doesn't make you itch. You also don't have to wet it. At least I didn't

[wick]

I like it.
It doesn't make you itch. You also don't have to wet it. At least I didn't

When it comes time for me to change my headers...which will be soon...I may give that stuff a go. I am going to swap my hooker super comps with the schoenfeld on mine.