94/95 rear brake parts

[Martin0660]

Just a bit of a feeler here. I'm looking for complete rear brake set-up from a 94/95 mustang, would also be interested in the axles, at least as a start (likely to be upgraded later). I'm tired of fighting with the rear wheel width with the SVO axles, and what i can get under there for tires. This stuff would be 3/4" a side more narrow, and let me run a pro star wheel with a 10.5 or better tire ;)

My other option is to flip the SVO brakes and use fox width axles, but it seems nobody has figured out the e-brake with that deal yet. I'm in no rush, and looking for a good deal ;)

Bob Myers

[wick]

You sure about that. The SN 95 axles are wider than the foxes.

[Martin0660]

You sure about that. The SN 95 axles are wider than the foxes.

Yep, The SN95's & 87/88 TC's axles are 3/4 longer than the Fox body, but the SVO axles are 1 1/2" longer than the fox. The SN 95 stuff would move my wheels IN 3/4" a side.

Bob Myers

[wick]

Never mind. I did not read everything.

[wick]

Yep, The SN95's & 87/88 TC's axles are 3/4 longer than the Fox body, but the SVO axles are 1 1/2" longer than the fox. The SN 95 stuff would move my wheels IN 3/4" a side.

Bob Myers

I realized that after reading more into your post and another thread. Sorry. HAHA I am, however, now educated on something new. Thanks.

[lib88stang]

Bob I also heard about running sn axles in a TC rear with the tc calipers but you have to have a spacer behind the back brake pad? Never did this just heard it.

[Martin0660]

Shaun - that will work, but I hate the TC calipers, I lived with them on my TC, never going back to those sliders.

Bob Myers

[lib88stang]

Shaun - that will work, but I hate the TC calipers, I lived with them on my TC, never going back to those sliders.

Bob Myers

will a trick wheel work if you get the right offset?

[Martin0660]

will a trick wheel work if you get the right offset?

I'm sure I can, but this is mainly driven by me wanting to run Weld Pro-Stars ;) The most freindly one they make is a 15 x 8 with a 5.5 BS. If I move the wheels in 3/4" they would be about right ;)

Bob Myers

[yeahloh95]

bob i might be able to help you out woth some axles i am up grading mine"95" to 31 spline , just not sure when , the svo is eating up all my spare time.