Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: Dang Ranger....

  1. #21
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    Since the oil pump went bad, I would pull distributor cap off and wiggle the rotor to see if you have a lot of play. Maybe something is wrong on the bottom of the distributor. Another thing to try is pull the spout wire to see if it will settle the jumping around. Timing belt ok?
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  2. #22
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    No dizzy. It's a twin plug, twin coil pack truck.

    I replaced the oil pump b/c the pick up tube clogged and likely starved it. Just did both. Didn't do the timing belt though. The belt looks ok but some how the crank pulley is 20 degrees out.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  3. #23
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    I kept jumping time on my turbo coupe because it didn't have a cover on the belt. I was getting rocks up in it or something
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  4. #24
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Fixed.

    Lined up up all the timing marks, put belt back on and runs good. I'll stick a new belt on it but just wanted to make sure my diagnosis was right. The belt actually looked really good and the tensioner was fine.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  5. #25
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Quote Originally Posted by Dan B. View Post
    Meh........



    I'd rather change my name to Caitlyn Jenner.





    ]
    not everyone can handle going fast or having power so id say stick to a ford motor for the tamer power levels

  6. #26
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Quote Originally Posted by George C View Post
    not everyone can handle gay sex or being ramroddedso id say stick to a ford motor for lots of vagina and heterosexual activities
    thanks for the advise.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  7. #27
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Quote Originally Posted by Dan B. View Post
    thanks for the advise.
    dont forget....
    Faggots
    Only
    Ride
    Dicks


    before the next editing....:)

  8. #28
    Member 2000GT's Avatar
    Join Date
    Aug 2006
    Location
    Plum, PA
    Posts
    1,611
    .........
    Last edited by 2000GT; 06-08-2015 at 07:53 PM.

  9. #29
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    Quote Originally Posted by George C View Post
    dont forget....
    Faggots
    Only
    Ride
    Dicks


    before the next editing....:)
    here's your thread Dan. I don't see how you can't build a good relationship with the above quote... :hugsandkisses"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •