Page 1 of 7 123 ... LastLast
Results 1 to 20 of 138

Thread: Project Casper

  1. #1
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490

    Project Casper

    This is my 2010 Crewcab, Wife named this truck when we first got it. Its has served a few purposes over the years.
    Truck started off as your average daily driver and as youll see in pics transformed, for about 18 months truck was a heads cam Procharged 5.3 on 12 psi...I made 540/545 to wheels.. Blower was over spun and It was loosing boost in higher rpms. The headunit was a P1sc with a 3.2 pulley, compression combo was around 10.2....combo ran 12.5@113 stock converter with stock 342 gears

    It was a fun combo and enjoyed it but the procharger ended up eating itself from being overspun and towing, this go around I chose the route of my roots which is turbo.

    So sit back and enjoy the build

    heres a few pics of how truck currently looks






    truck for suspension is 3" worth of lift up front, firestone airbags out back, 3/4 ton leaf springs, GMT800 lift blocks, rides on GM accessory wheels 20x9 with 35x12x20 rubber

    Last winter I broke my 2nd 10 bolt so i ditched that setup and went with a GM 14 bolt,Tru-trac, tossed in 488s and used a TA girdle




    Not shown but truck now has big brakes, it has 14" front rotors with EBC towing pads on front and I swapped to disks on the rear with Silverado SS calipers from Cocaine. It also has 14" rotors


    Since im about trying to keep things clean I chose to install my Meth controller in a little pocket in my dash, since this pic was taken the knob is now black



    heres what I tow around, its a Lark 26' + Vnose enclosed trailer


    Last edited by George C; 12-15-2015 at 03:56 PM.

  2. #2
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    For 2016 truck is going under heart surgery and Is getting a aluminum 6.2 to replace its 5.3 HO

    I chose to reuse my TFS 220 heads, but swapping to a larger cam



    and since I do all my own work heres the goodies for the turbo build, material for the turbo kit along with the Turbo and gate

    turbo is a S475 98turbine T6 1.32 ar
    gate is a Precision 66mm



    the crate shortblock should be here tomorrow afternoon

  3. #3
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Nice....another one!

  4. #4
    Tripedalist yeahloh95's Avatar
    Join Date
    Aug 2006
    Location
    Everett, Pa
    Posts
    5,065
    nice truck
    Troy
    95 gt 11.3 @ 126
    68 f100 SB soon to be coyote powered
    12 GT 6m cobra jet powered 11.4 @124
    90 lx supercharged 440 rwhp on 8 lbs
    17 f150 crew cab coyote powered

    PEOPLE HAVE MORE FUN THAN ANYONE

  5. #5
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Seeing double...????
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  6. #6
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Why you say that paxton

  7. #7
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Lots of cool white Chevy trucks around here.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  8. #8
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Lol, also having my daughters powerwheel silverado painted to match cocaine

  9. #9
    Senior Member rrjjpp74's Avatar
    Join Date
    Apr 2015
    Location
    Fayette City
    Posts
    155
    Swear I have saw that truck at the gas station in Belle Vernon. The I 70/201 exit. Or there is another almost identical running around. Also was you on Fullsize Chevy?
    2001 Trans am WS6

  10. #10
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    I do live in carroll twp

  11. #11
    Senior Member rrjjpp74's Avatar
    Join Date
    Apr 2015
    Location
    Fayette City
    Posts
    155
    This is my old one.
    Attached Images Attached Images
    2001 Trans am WS6

  12. #12
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Yup i remember you, youre down off brownsville rd

  13. #13
    Senior Member rrjjpp74's Avatar
    Join Date
    Apr 2015
    Location
    Fayette City
    Posts
    155
    Yep not too far.
    2001 Trans am WS6

  14. #14
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Shortblock and goodies showed up
    Ls3 timing chain
    Ls3 lower sprocket
    Ls2 timing dampener
    Ls7 lifters
    Ls9 head gaskets
    ARP headstuds
    Prc 650 springs
    Comp push rods
    SLP oil pump
    Ls3 lifter trays
    ARP rod bolts




  15. #15
    Senior Member black 94's Avatar
    Join Date
    Sep 2009
    Location
    charleroi
    Posts
    478
    Nice truck already and after following ur other build I'm sure it will be a wicked piece when finished!

  16. #16
    Very sharp truck! She is a beauty!!

  17. #17
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    found some time to start working on the turbo kit

    cut the stock flange off the manifold and welded up a Vband


    and i started working on the manifold



  18. #18
    Senior Member Fast Gypsy's Avatar
    Join Date
    Jan 2011
    Location
    Allison Park, Pa.
    Posts
    365
    George. I only have one question ?? "WHEN DO YOU FIND TIME TO SLEEP"?

    Merry Christmas and a Happy New Year to you and your family.
    1988 Mustang 408 W. All Motor New Best 5/5/18 10:15 @ 131 mph.
    1964 Chevy SS Convertible 327 300 HP.
    1964 Chevy SS Hardtop 327 250 HP. Sold 2017.
    1954 Ford Radical Custom Convertible.
    1991 GMC Sierra 1500-SLE 1/2 Ton Reg. Cab Short Bed.
    1930 Model A Sport Coupe Owned Since 1970 Sold 2016.

  19. #19
    If You Wanna thedak's Avatar
    Join Date
    Jul 2008
    Location
    DMB
    Posts
    2,143
    Damn....

  20. #20
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    Thank you and happy holidays to you and your family as well

    Helps some im off work right now

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •