Looking for all recommendations on forced induction for a 5.3L 1500 Silverado? I wanna build a mild/fun truck and really like this platform. Maybe tow with it even during the summer. IDK, but it needs to have some balls.
I've been looking at the Whipple systems and they seem pretty good. Just wanted to ask the experts what they recommended or if I was missing what was available?
Are there turbo systems available for these trucks?
All help is greatly appreciated!
Cant help you too much there but I do know that there is a big group of performance related truck guys over @ http://www.performancetrucks.net/forums/
2019 Tesla Model 3 Performance
did you read about project casper?
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
Ask George
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
I didn't know of that place! Thanks!!Originally Posted by SK360
I did not, I've seen project Cocaine??
George of the jungle? Who's George?
http://www.steelcitymusclecars.com/f...Project-Casper
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
Check out Casper. Same guy that built cocaine. He has a thread on here about building his DD hauler.
1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.
1986 Ranger--2WD, 5.0/T5/8.8.
Thanks, I will do!
This would probably be the most cost effective route... http://www.on3performance.com/shop/2...-turbo-system/
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
George builds some bad ass sh!t.
I would not use a on3 turbo kit, i would use parts but kits temd to crack
Kbracing is a buddy of mine and sells good turbo kits, yes ive built my own setups
Ive towed with a blower and and turbo hands down did job better with lower temps
Thanks, George! I'll check Kb out for sure.
I've got to say, all of these "turbo kits" available for this truck look awful. The manifold design, casting, coupling, bends, parts, welds, pieces...looks like shit. Thanks, but no thanks.
Last edited by MrAudia; 03-18-2016 at 11:52 AM.
Look at Trick Turbo as their manifold is a casted piece
Majority of trucks use a simple proven log setup, theres setups making 1300 rwhp with log style, it originated from the turbo buicks of the 80s
Any compressed air ever enter this equation?
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
I always read about these Magnuson Magnachargers for GM trucks...
http://www.magnacharger.com/p-71-tah...ercharger.aspx
2019 Colorado ZR2
Posting Permissions
Reply With Quote
Bookmarks