Exhaust replacement

[PSPstang]

Can anyone reccomend a very good exhaust person to handle my car?

This is what I got 1991 fox gt with 21k original miles. Car is 100 percent mint and original down to original catback.
The catback has a few sections where it has pinholes and is rusted on the pipe seams.

I am looking for a specialty exhaust place to replace my intermediate pipes and tailpipes with something that looks as original and welded to the oem mufflers....I don't want the Midas special with the bend marks in the pipe etc.

Any suggestions?

[mustang50lx]

There is a 1993 Cobra exhaust on Ebay that was removed at 297 miles. I don't know if they are the same. Not cheap.

[mustang50lx]

Never mind. I didn't see the GT part.

[SlowSix]

I honestly doubt you will find anywhere that can do it without "pipe bend marks".

That being said, Rodeheaver's has done 4-5 exhausts for me before.

[juice_man_86]

You'll more than likely have to buy a prebent exhaust. Most are 2 1/2 inch but stock is only 2 1/4 inch.

[PotBellyPaul]

I'd recommend a Dynomax Super Turbo system for your car. For a couple reasons. They were the o.e. manufacturer of the exhaust anyway, so they fit the best. And I've installed everything on these cars over the years. 2? You can get a stock appearing, brushed look and in a 2.25" size just like the factory stuff. #3? They're pretty damn quiet also. Those kits are super nice and close as you will get to the factory stuff.

[PotBellyPaul]

http://www.dynomax.com/dual-2-25-cat...-mufflers.html

[John4cam]

I had the super turbos on my old fox back in the day, was definitely mild in the sound department.