Page 1 of 3 123 LastLast
Results 1 to 20 of 44

Thread: 1997 Tacoma Frame rehab

Hybrid View

  1. #1
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331

    1997 Tacoma Frame rehab

    This vehicle is neither fast or fancy, certainly does not fall under "Performance" but it is foreign.

    Over the weekend I was given a 1997 Tacoma. It was from a retired friend that was dealt a poor hand with his health. I'd helped him a number of times and he was ready to get rid of the truck. He decided to pass it along to me since I like working on vehicles in need of repair. It's a SX (does that mean slow in Toyotese??), 2.7L, 4wd, 5 speed, 47k miles. This truck was missed in the frame recall....the original owner did not take it in. So, as expected the frame is toast.






    Yesterday I started the frame rehab project. The bed is pulled, we hammered all over the frame to knock the scale loose and find the soft spots. Bed removal took about 45 minutes. None of the bolts fought me. Had this been a Ranger, ALL of them would have been broken off. Maybe this Toyota thing isn't so bad.





    Oh....wait.....maybe this Toyota thing isn't so great.





    Free Tacoma parts!!






    Last edited by Dan B.; 05-22-2018 at 01:16 PM.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  2. #2
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    I attacked it with the 3800psi pressure washer last evening. Had the throttle dialed up and the fine tip on the gun...that really peeled the scale and cleaned the frame off.





    Are these called "speed holes"?









    Last edited by Dan B.; 05-22-2018 at 12:25 PM.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  3. #3
    it's soo-tack sutyak's Avatar
    Join Date
    Aug 2006
    Location
    Fairmont, WV
    Posts
    2,467
    Wow, that's some serious rust!
    mark
    '04 Mach 1. Built. Turbo. 667whp/631wtq
    '06 Focus. Built. Turbo. WMI. 12.43 @ 115 (sold)
    '03 Mach 1 : 12.61 @ 106.59 (sold)
    he's into that, that spiritual stuff. <><

  4. #4
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Quote Originally Posted by sutyak View Post
    Wow, that's some serious rust!
    I know. Other than the drivers door pushed in the body is in very good condition. The interior is spotless. AND it runs fantastic!! The door got hit when the second owner was leaving his house (uphill driveway) and the rear brake line failed. He coasted back into something. There is no rust on the doors so I'm going to push it out the best I can and deal with it. I'd rather do that than put a rusty door on it that may be straight. It seals tight and closes fine as is.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  5. #5
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    When you say it missed the recall, does that mean they closed it down? I know a guy that had his truck replaced under that, but it was indeed a long time ago.
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  6. #6
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    The 1997's were only bought back at 1.5x KBB value. July 2014 is when that offer expired on this truck.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  7. #7
    Member travj31's Avatar
    Join Date
    Jul 2007
    Location
    Uniontown
    Posts
    1,688
    Wow...with how clean the top side is it’s crazy how rough the frame is. I had a buddy that took advantage of the buy back program with one of these around 2010 or so and he made out like a bandit.





  8. #8
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    That’s a nice truck. Are the frame pieces available or do you need to fab up patches?
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  9. #9
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Quote Originally Posted by wick View Post
    That’s a nice truck. Are the frame pieces available or do you need to fab up patches?
    They are available but there is no good metal to tie into for the pieces that can be bought. After a little investigation last evening I think the entire back half is going to go away. I hope to spend some time soon measuring all the attachment points....springs, bed mounts, etc and making a plan to tube frame the back end.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  10. #10
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    Quote Originally Posted by Dan B. View Post
    They are available but there is no good metal to tie into for the pieces that can be bought. After a little investigation last evening I think the entire back half is going to go away. I hope to spend some time soon measuring all the attachment points....springs, bed mounts, etc and making a plan to tube frame the back end.

    Thats not a bad idea. Probably easier in the long run anyways.
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  11. #11
    Tripedalist yeahloh95's Avatar
    Join Date
    Aug 2006
    Location
    Everett, Pa
    Posts
    5,065
    looks like a fun project
    Troy
    95 gt 11.3 @ 126
    68 f100 SB soon to be coyote powered
    12 GT 6m cobra jet powered 11.4 @124
    90 lx supercharged 440 rwhp on 8 lbs
    17 f150 crew cab coyote powered

    PEOPLE HAVE MORE FUN THAN ANYONE

  12. #12
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Because RACETRUCK!!!!
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  13. #13
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Trailering it to a local fab shop tomorrow. Going to have them look at bending me new frame rails that will slide inside the existing rails under the cab. I can handle it from there.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  14. #14
    likes turbos Tom's Avatar
    Join Date
    Apr 2007
    Location
    Rostraver
    Posts
    918
    frame looks fine to me, just needs some plastidip

    also Ellis Juan Swap!
    1987 Fiero GT
    Precision 6466, L67, 4T80e, MS3Pro

  15. #15
    Senior Member Ares's Avatar
    Join Date
    Oct 2006
    Location
    Pittsburgh, PA
    Posts
    2,363
    Nothing some JB weld can't fix.
    Ed...
    2012 Ram 2500 4x4, 5.7 Hemi, leveled, 35" tires
    2004 Mustang GT - Comp Orange/5speed Best 1/4 11.94@113.64, 1/8 7.59@89.48, 1.57 60' - Best 60' 1.51, just a NA 2v

  16. #16
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    My new frame pieces showed up from Nevada.

    Just tilt your head......

    20180606_172936.jpg

    20180606_173141.jpg
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  17. #17
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  18. #18
    Looks like a big job but the rest of the truck is in such good shape I would be doing the same thing!

  19. #19
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Quote Originally Posted by 07v6vista View Post
    Looks like a big job but the rest of the truck is in such good shape I would be doing the same thing!
    So far I am into it for $444. $300 for the frame/shipping and $144 for title transfer. I'll end up over $1k when I'm done...new shocks, gas tank (optional), brake lines and other misc items that are either needed or optional since I have it apart. But even if it were $2k, where do you get a 47k mile 4wd truck for that price? It'll be a fun project.
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

  20. #20
    Senior Member Dan B.'s Avatar
    Join Date
    Sep 2009
    Location
    Armagh, PA
    Posts
    4,331
    Time for some updates.

    20180607_195658.jpg
    Quote Originally Posted by John4cam View Post
    Ahh fuque
    1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.

    1986 Ranger--2WD, 5.0/T5/8.8.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •