New guy in need of a half shaft

[RUTHLESS]

Hey guys! I just picked up a sonic blue 03 Cobra last week and my god I should have moved over from the GM camp long ago. The car has 9k on it and has a ported eaton, 2.93 pulley set, accufab TB and inlet, headers and x pipe and a few other little things. The thing moves!!

A few days after getting the car I rotated the tires to find a nice coating of "smurf poop" on the inside of my wheel. I have been looking all over the net, I even called the dealership (I knew not to but I wanted a laugh) and for the life of me I can't find an outer CV replacement boot anywhere. Can anyone get them?? If not can anyone direct me to a new axle that is cheaper than the $355 the dealership wants? They are F'n nuts!

[One Sweet Day]

I'm not sure where to get them, but did want to say welcome! 03 cobras are sick!


Welcome to scs!

[no1fordgirl]

Good luck with the search, If I hear of any places, I will let ya know ;)

[speedracer]

Hey guys! I just picked up a sonic blue 03 Cobra last week and my god I should have moved over from the GM camp long ago. The car has 9k on it and has a ported eaton, 2.93 pulley set, accufab TB and inlet, headers and x pipe and a few other little things. The thing moves!!

A few days after getting the car I rotated the tires to find a nice coating of "smurf poop" on the inside of my wheel. I have been looking all over the net, I even called the dealership (I knew not to but I wanted a laugh) and for the life of me I can't find an outer CV replacement boot anywhere. Can anyone get them?? If not can anyone direct me to a new axle that is cheaper than the $355 the dealership wants? They are F'n nuts!

Shoot Burntire a PM he knows everything there is to know about half shafts lol. oh and welcome.

[scott5]

welcome.. got any pics of that cobra?

[RUTHLESS]

Thanks for all the warm welcomes! I will update my signature when I have some time but here are a few pics...

[Stangzrule]

Welcome to the site.

[KBCobra]

Welcome!!

Check these 2 sites, people are selling stock halfshafts all the time.

www.svtperformance.com
www.modularfords.com

[03 OW SVT]

Hey guys! I just picked up a sonic blue 03 Cobra last week and my god I should have moved over from the GM camp long ago. The car has 9k on it and has a ported eaton, 2.93 pulley set, accufab TB and inlet, headers and x pipe and a few other little things. The thing moves!!

A few days after getting the car I rotated the tires to find a nice coating of "smurf poop" on the inside of my wheel. I have been looking all over the net, I even called the dealership (I knew not to but I wanted a laugh) and for the life of me I can't find an outer CV replacement boot anywhere. Can anyone get them?? If not can anyone direct me to a new axle that is cheaper than the $355 the dealership wants? They are F'n nuts!

Dude Welcome, You got that car from a guy in Appomaddox Virginia... I know cause I looked at that car and almost bought it... Instead I bought a white one from him odviously.

[RUTHLESS]

You would be correct. He also had a Yellow one that I went for a ride in but the blue one seemed to be what I was looking for and is a bit faster than the stock one. I did make one improvment since I got it... and did the vac line swap. She runs a little better now.

I know cause I looked at that car and almost bought it...

You might be the guy that he was telling me about when I was first thinking about picking it up. I was told I better hurry up because he had other people looking. lol

[03 OW SVT]

You would be correct. He also had a Yellow one that I went for a ride in but the blue one seemed to be what I was looking for and is a bit faster than the stock one. I did make one improvment since I got it... and did the vac line swap. She runs a little better now.

You might be the guy that he was telling me about when I was first thinking about picking it up. I was told I better hurry up because he had other people looking. lol

I've had mine since the middle of Feb. The reason I didn't buy that one was because I wanted to do my own mods. But that thing is sweet also.

[RUTHLESS]

I got it because it was built. lol Long story short...I was dropping a stroked LS6 into a mint thirdgen camaro and got screwed big time. My engine let go on the engine dyno!! I was fed up with working on the car and not driving it after 4 years and I saw COBRA. Now after having this to play with I am going to say hell with the IROC project and start selling parts.

[03 OW SVT]

I got it because it was built. lol Long story short...I was dropping a stroked LS6 into a mint thirdgen camaro and got screwed big time. My engine let go on the engine dyno!! I was fed up with working on the car and not driving it after 4 years and I saw COBRA. Now after having this to play with I am going to say hell with the IROC project and start selling parts.

Glad to see ya finally came to your senses. You won't be sorry. I luv my Termie

[burntire]

Shoot Burntire a PM he knows everything there is to know about half shafts lol. oh and welcome.

Yes here is the rule on half shafts. KEEP THE STOCKERS!!!

[RUTHLESS]

Burntire, I gathered that from reading your other posts and thank you for saving me from the pain. I will give DDS a call and see if they have boots that fit the stockers and let everyone know. I still cant believe how much trouble it has been finding one.

[burntire]

Burntire, I gathered that from reading your other posts and thank you for saving me from the pain. I will give DDS a call and see if they have boots that fit the stockers and let everyone know. I still cant believe how much trouble it has been finding one.

First set of LVL 5's
http://www.modularfords.com/forums/f...lem-77587.html

Second Set
http://www.modularfords.com/forums/f...lem-80576.html


I have a nice video also with all my findings on the subject. LOL

[INSANELY CRAZY]

welcome

[Domination]

You could try a universal fit. They make 2 sizes.

[RUTHLESS]

I had some luck! DSS had some used ones that they sold me. I picked up a spare inner and outer plus the one I needed.