Fox Schrader valve question

[JR302GT]

What size NPT is the thread on the Shrader valve port, 1/16" or 1/8" maybe? Or isn't it NPT at all?

Thanks,

John

[Viper_ed]

If you still have the plastic cap that screws on to it, just take it to Lowes, Home Depot, etc. and try it on one of their handy dandy sizing boards.

[fork5o]

If you still have the plastic cap that screws on to it, just take it to Lowes, Home Depot, etc. and try it on one of their handy dandy sizing boards.

it should be 1/8". thats what the sending unit on the fp gauge is.

[Balaska347]

It's not 1/8" because you have to buy the adapter for the mustang fuel rail when you get a fuel psi gauge. I'm not sure what size it is but it is smaller then 1/8'" NPT.

[fork5o]

It's not 1/8" because you have to buy the adapter for the mustang fuel rail when you get a fuel psi gauge. I'm not sure what size it is but it is smaller then 1/8'" NPT.

oh ok . i put mine in the fpr so i was trying to remember what it said. i knew there was a 1/8 somewhere in there

[Rodeheaver's]

they are 1/16" npt