Page 1 of 2 12 LastLast
Results 1 to 20 of 49

Thread: Parting out 1990 GT convertible

Hybrid View

  1. #1
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905

    Parting out 1990 GT convertible

    5.0L auto, black interior. Perfect doors, deck lid with rack, tons of good parts. The wife has our camera in Florida this week so I don't have any pictures. Let me know what you need and ill give out pricing. It is a complete car at this point. The motor has a bad head gasket.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  2. #2
    whatever it takes stangfever's Avatar
    Join Date
    Apr 2007
    Location
    i b where im at
    Posts
    674

    car

    what shape is the car in . is it salvageable

  3. #3
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Very salvageable but I need a few things for my 90. It has a large hole in the trunk on the drivers side. Other than that it is pretty much rust free.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  4. #4
    Senior Member coralcoupe1993's Avatar
    Join Date
    Sep 2006
    Location
    Robinson
    Posts
    3,842
    I need the AC/Heat swich and cable if that is good.
    87 GT
    93 Notch
    60 Country Sedan
    Fairlanes/Galaxies 59-68
    67 Contiental 4 door
    06 Powerstroke

  5. #5
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by coralcoupe1993 View Post
    I need the AC/Heat swich and cable if that is good.
    Ill check tomorrow.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  6. #6
    Senior Member 383taman's Avatar
    Join Date
    Jan 2007
    Location
    shaler,pa
    Posts
    1,010
    He77 i need your money sending wife to florida.


    Quote Originally Posted by Sonic03snake View Post
    5.0L auto, black interior. Perfect doors, deck lid with rack, tons of good parts. The wife has our camera in Florida this week so I don't have any pictures. Let me know what you need and ill give out pricing. It is a complete car at this point. The motor has a bad head gasket.

  7. #7
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by 383taman View Post
    He77 i need your money sending wife to florida.
    All expenses paid, only problem is she is there for work. LOL. 5 days of vacation for me.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  8. #8
    Senior Member 383taman's Avatar
    Join Date
    Jan 2007
    Location
    shaler,pa
    Posts
    1,010
    Yea i hear that.


    Quote Originally Posted by Sonic03snake View Post
    All expenses paid, only problem is she is there for work. LOL. 5 days of vacation for me.

  9. #9
    Senior Member 6987stangs's Avatar
    Join Date
    Jan 2007
    Location
    VALENCIA,PA
    Posts
    687
    Quote Originally Posted by 383taman View Post
    Yea i hear that.
    YOURS WILL COME BACK TOO


  10. #10
    Senior Member 383taman's Avatar
    Join Date
    Jan 2007
    Location
    shaler,pa
    Posts
    1,010
    Nope shes probly the only one wishing that lol


    Quote Originally Posted by 6987stangs View Post
    YOURS WILL COME BACK TOO

  11. #11
    92 rio drop
    Join Date
    Jun 2007
    Location
    south hills
    Posts
    58
    hey i need lots of stuff driver/passenger side doors.....door panels etc...??
    hown mutch???
    driver side /passenger side seats ???

  12. #12
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by gypsystangs View Post
    hey i need lots of stuff driver/passenger side doors.....door panels etc...??
    hown mutch???
    driver side /passenger side seats ???
    Hi,

    I have a mint pair of doors and a pair of seats. Where are you from?
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  13. #13
    92 rio drop
    Join Date
    Jun 2007
    Location
    south hills
    Posts
    58
    from over brook pgh/51 area
    my names paul
    412/855-0004

  14. #14
    Senior Member
    Join Date
    Aug 2006
    Location
    Pittsburgh, PA
    Posts
    175
    Does the motor to put the roof up and down still work?
    '07 GT/CS & '11 FX4

  15. #15
    Member torqueboxer's Avatar
    Join Date
    Apr 2007
    Location
    white oak, pa
    Posts
    638

    Had a fire in my 93 vert

    Im looking for the driver side/under dash wiring harness, driver side splash shield, master cyl, solonoid, maybe the headlight harness, front left fender.

    93 canary yellow summer edition 38,000mi white leather,auto and the engine bay had to erupt in flame. Guess its time to pull the motor and install some high comp pistons,and some camshaft. I almost cried when i saw the flames and the damage.

    The harnesses, brake cyl. are the most important things so i can at least put the windows up to keep the critters out.

  16. #16
    Member torqueboxer's Avatar
    Join Date
    Apr 2007
    Location
    white oak, pa
    Posts
    638

    Had a fire in my 93 vert

    Im looking for the driver side/under dash wiring harness, driver side splash shield, master cyl, solonoid, maybe the headlight harness, front left fender.

    93 canary yellow summer edition 38,000mi white leather,auto and the engine bay had to erupt in flame. Guess its time to pull the motor and install some high comp pistons,and some camshaft. I almost cried when i saw the flames and the damage.

    The harnesses, brake cyl. are the most important things so i can at least put the windows up to keep the critters out.

  17. #17
    Member torqueboxer's Avatar
    Join Date
    Apr 2007
    Location
    white oak, pa
    Posts
    638

    Had a fire in my 93 vert

    Im looking for the driver side/under dash wiring harness, driver side splash shield, master cyl, solonoid, maybe the headlight harness, front left fender.

    93 canary yellow summer edition 38,000mi white leather,auto and the engine bay had to erupt in flame. Guess its time to pull the motor and install some high comp pistons,and some camshaft. I almost cried when i saw the flames and the damage.

    The harnesses, brake cyl. are the most important things so i can at least put the windows up to keep the critters out.

  18. #18
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by 4bangstangvert View Post
    Does the motor to put the roof up and down still work?
    Motor works good. Make me a reasonable offer.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  19. #19
    fknfast88 fknfast's Avatar
    Join Date
    May 2007
    Location
    Adah, Pa
    Posts
    31
    Does it have factory or dealer air?

  20. #20
    Hi I'm Stupid 393rag's Avatar
    Join Date
    Sep 2006
    Location
    FayetteNam
    Posts
    889
    Any updates/prices on that stuff i need Lou. Thanks.

Similar Threads

  1. Parting out an 87 GT convertible
    By Sonic03snake in forum Ford Vehicles
    Replies: 24
    Last Post: 02-04-2012, 09:55 PM
  2. Parting out 1990 notch,5.0,5 speed
    By 1badnotch in forum Ford Vehicles
    Replies: 22
    Last Post: 02-13-2010, 04:14 PM
  3. Parting Out 1990 GT hit in back
    By Gray 5.0 in forum Ford Vehicles
    Replies: 9
    Last Post: 10-08-2009, 11:24 PM
  4. 94/95 v6 convertible parting out
    By blksunshine88 in forum Ford Vehicles
    Replies: 0
    Last Post: 01-05-2009, 06:05 PM
  5. parting out convertible
    By chuck94 in forum Ford Vehicles
    Replies: 3
    Last Post: 04-29-2007, 02:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •