Lou, Im interested in the rear backseat. What condition and what do you want for them?
2002 GT- Sold
2003 F-150 ext cab 5.4l v8 4x4
1990 7-up vert 346rwhp/414rwtq
08 Polaris/KTM Outlaw 525 IRS
OK, if Viper_Ed is correct and the speed sensor will fit my car.. How much?
Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
Ill check the sensor out over the weekend.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
THANKS LOU! NOW JUST GOT TO FIND TIME TO PAINT AND PUT THE STUFF ON.
hey i need lots of stuff driver/passenger side doors.....door panels etc...??
hown mutch???
driver side /passenger side seats ???
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Any updates/prices on that stuff i need Lou. Thanks.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
How much for the a/c in need the brackets and the compressor for now?
from over brook pgh/51 area
my names paul
412/855-0004
Does the motor to put the roof up and down still work?
'07 GT/CS & '11 FX4
Im looking for the driver side/under dash wiring harness, driver side splash shield, master cyl, solonoid, maybe the headlight harness, front left fender.
93 canary yellow summer edition 38,000mi white leather,auto and the engine bay had to erupt in flame. Guess its time to pull the motor and install some high comp pistons,and some camshaft. I almost cried when i saw the flames and the damage.
The harnesses, brake cyl. are the most important things so i can at least put the windows up to keep the critters out.
Im looking for the driver side/under dash wiring harness, driver side splash shield, master cyl, solonoid, maybe the headlight harness, front left fender.
93 canary yellow summer edition 38,000mi white leather,auto and the engine bay had to erupt in flame. Guess its time to pull the motor and install some high comp pistons,and some camshaft. I almost cried when i saw the flames and the damage.
The harnesses, brake cyl. are the most important things so i can at least put the windows up to keep the critters out.
Bookmarks