Results 1 to 3 of 3

Thread: 427W (4.125) stroker pistons, like new $400

  1. #1
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406

    427W (4.125) stroker pistons, like new $400

    Custom 427W stroker (4.125x4.0 with 6.200 rods 9.5 deck); can be used in other 4.125 bore combos
    Weisco Custom (order#9462136) spec'd by Erik Koenig (racer7088) HKE
    Spec'd for NA use with mild nitrous, lightweight at 10:1
    Specs:
    4.125 bore (pistons 4.122), 1.285 comp dist., 21cc dish, .927 pins, 10:1 with 61-63cc, approx. weight with pins 600g; pins and spirolocks included
    These were used in my NA 427W street motor. Approx. 500 street miles, 10 passes, 20 dyno pulls, all NA. No engine damage, only swapped for low comp. turbo pistons. Just cleaned and inspected by engine builder. Only issue is very minor skirt marks due to excessive rich tune/contaminated oil. Very minor marks on the skirts (look worse with pics flash); cleared by the engine builder to be used without any concerns.
    $400
    pics





    Thanks, J
    drjotting@yahoo.com
    Last edited by biminiLX; 07-10-2007 at 09:00 PM.

  2. #2
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    bump

  3. #3
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    bumpage

Similar Threads

  1. 427w long block w/afr225
    By Naste95 in forum Ford Vehicles
    Replies: 0
    Last Post: 10-27-2011, 03:56 PM
  2. 427w stroker shortblock,eagle 4340 crank/rods,etc
    By 1badnotch in forum Ford Vehicles
    Replies: 19
    Last Post: 03-01-2011, 01:04 PM
  3. Wtb 351w 408 Stroker Pistons
    By tjvantana in forum Ford Parts
    Replies: 0
    Last Post: 12-28-2008, 12:05 AM
  4. 347 stroker -12.5cc pistons,h beams,cast crank
    By 349Stroker in forum Ford Vehicles
    Replies: 0
    Last Post: 11-09-2007, 11:24 PM
  5. FS:427W shortblock,all forged,never fired
    By 1badnotch in forum Ford Vehicles
    Replies: 5
    Last Post: 07-16-2007, 01:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •