The official part out thread

[Cam99]

Here's the list so far. I'll update as I sell more stuff

393 stroker long block. It's a 1969 351 windsor. Eagle cast crank, Eagle SIR rods, Speed pro hypereutecic flat top pistons. Edlebrock Victor Jr. heads gasket matched, and .642 lift Doug Herbert solid roller cam. Ford racing valve covers. Less than 1000 miles on motor. It's a VERY strong runner. $ 3850.

Built C4 with manual valve body, and GER 3500 RPM stall converter. Works perfectly. $650

MSD billit 351w distibutor with FRPP wires- Sold

B&M pro rachet shifter $120.

Holley 750 double pumper with proform drag racing main body and dual line feed with fuel pressure gauge built in $275

Edlebrock victor jr. 351w carb intake gasket matched $185.

BBK 351w chrome longtubes. Nice shape SOLD

custom made 3" off road H with magna flow dumps. Excellent condition SOLD

Brand new MSD 6al ( still have the reciept, has about 10 miles on it) $195

Steeda double adjustable uppers $125.00

Weight jacker style adjustable lowers $300

Autometer Pro-comp silver 5" tach $95

Autometer ultralight silver mech. oil pressure SOLD

Autometer ultralight silver water temp SOLD

Autometer vent gauge cage with louvers $20

Griffen alum. radiator with electric fan SOLD

Aeromotive red anodized electric fuel pump ( for carb.) 10 miles on it. $135.

Holley blue pump electric pump with regulator $65

MSD blaster 2 coil. New- Sold

So far have pending sale on wheels and the roller itself.

Open to offers, but I think pricing is fair. Will have more later. Thanks.

[DING]

Some info on the radiator and fan... pics, details??

Send to hankdingfelder@suddenlink.net

[Cam99]

Some info on the radiator and fan... pics, details??

Send to hankdingfelder@suddenlink.net

Email sent.

[Cam99]

Rad., water temp, and oil pressure gauge are sold. Thanks.

[Cam99]

Some pics of the exhaust that were requested.

[Cam99]

Full exhaust is sold. Thanks

[Viper_ed]

Full exhaust is sold. Thanks

Anytime!

[Cam99]

Just a motor update since i was all over it pulling the exhaust off tonight. It has a 7 quart (canton?) oil pan and 1.6 scorpion roller rockers. Pulled the one valve cover off to gain access to header bolts and you could eat off the inside. Looks brand new, as it should with the miles.

[phillysrt4]

post some pics before you put the cover back on. might generate some interest.

[393rag]

Just a motor update since i was all over it pulling the exhaust off tonight. It has a 7 quart (canton?) oil pan and 1.6 scorpion roller rockers. Pulled the one valve cover off to gain access to header bolts and you could eat off the inside. Looks brand new, as it should with the miles.

It's a Probe Racing 7 quart pan.

[Cam99]

It's a Probe Racing 7 quart pan.

Thanks Brian

[Cam99]

Here's a quick pic with the valve cover off.

[393rag]

Here's a quick pic with the valve cover off.

Those are probe rocker stud girdles too.

[Cam99]

Some more pictures. Offers?

[wick]

Whatcha want for that MSD box?

[wick]

If your free right now, give me a quick ring. I have a few minutes of free time.

[lib88stang]

Cam, I'll take the gauge cage if you still have it, Let me know. Thanks

[Cam99]

Cam, I'll take the gauge cage if you still have it, Let me know. Thanks

I din't realize till I took it out that it didn't have the little directional air vent louvers in it ( so the air will just come straight out instead of bieng able to aim it up or down). If you don't care I'll sell it to you for 15 bucks. Let me know. Thanks

[Sonic03snake]

I can't edit the original post, so here's the update. Distributor and coil are gone.

Updated for ya.

[Cam99]

Updated for ya.

Cool. Thanks Lou