Results 1 to 9 of 9

Thread: Body repair and painter needed

  1. #1
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754

    Body repair and painter needed

    I am looking for recommendations on good painters to paint my car. This will be to paint the entire car and to do some touch up rust repair/body work as well. Let me know if anyone knows anyone. Thanks
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  2. #2
    Volkers in Youngwood @ 724-696-5309 This guy is the BEST!!!!!

  3. #3
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by racefan View Post
    Volkers in Youngwood @ 724-696-5309 This guy is the BEST!!!!!
    Either the wrong number or he is out of business cause the phone number has been disconnected.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  4. #4
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Try Charlie Baranowski in Moon Twp. He's on Stoops Ferry road, next door to West Penn Laco ( auto paint supply store ). He restored my Dad's '63 Avanti R2 and is almost done with his '57 TBird. Both cars are outstanding. He's a good old guy, does incredible work, and his rates are great. He might have too much work in the pipeline right now to take on your project, but it would be worth your time to at least drive by and talk to him / show him your car and see what he has to say. If your car would be a relartively quick job for him ( minimal metalwork ), he might be able to squeeze you in.

    Good luck!

    Ron
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  5. #5
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by PaxtonShelby View Post
    Try Charlie Baranowski in Moon Twp. He's on Stoops Ferry road, next door to West Penn Laco ( auto paint supply store ). He restored my Dad's '63 Avanti R2 and is almost done with his '57 TBird. Both cars are outstanding. He's a good old guy, does incredible work, and his rates are great. He might have too much work in the pipeline right now to take on your project, but it would be worth your time to at least drive by and talk to him / show him your car and see what he has to say. If your car would be a relartively quick job for him ( minimal metalwork ), he might be able to squeeze you in.

    Good luck!

    Ron
    Thanks. I stopped by there 1 saturday, but it was closed up. I'll stop by again
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  6. #6
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    The garage door is usually up if he's there. His driver is the old ( but really nice ) silver VW Beetle that sits out front.

    A few years ago he restored an old 195? Studebaker ( Hawk? ) that recently won a national competition. He can do it all. Great guy.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  7. #7

    Volkers #

    Jeff's new phone # is 724-635-0469. Was there on sat. getting Louie's snake the final buffing. Car is almost ready to go.

  8. #8
    Banned George C's Avatar
    Join Date
    Aug 2006
    Posts
    1,490
    do you work at advance auto parts in carneige? decent bodyman closer to you is Redramair hes a member on pittspeed. i have his cell. hes a standup guy with low prices and does quailty work

  9. #9
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by Quik View Post
    do you work at advance auto parts in carneige? decent bodyman closer to you is Redramair hes a member on pittspeed. i have his cell. hes a standup guy with low prices and does quailty work
    Yes I work there. You saw me last week.

    I am only there 2 nights a week and on the weekends, but my time will be limited in the month of Oct, cuase I have a few weddings and plans.

    He can come down and look at the car if it is there. If my stang is there, then I am working. If I am not in the store, I might be on delivery and will be back in a couple minutes usually.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

Similar Threads

  1. Fox Body Parts Needed
    By mustang50lx in forum Ford Parts
    Replies: 0
    Last Post: 09-06-2014, 08:57 PM
  2. Spark Plug Repair Help Needed
    By Flyin Monkey in forum General Tech
    Replies: 1
    Last Post: 05-22-2010, 11:08 PM
  3. Body Parts Needed!
    By 95gts in forum Ford Parts
    Replies: 14
    Last Post: 11-03-2009, 09:08 PM
  4. Painter Needed
    By pop's stang in forum Ford Parts
    Replies: 1
    Last Post: 03-22-2009, 10:05 PM
  5. Replies: 18
    Last Post: 03-04-2008, 07:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •