Results 1 to 20 of 55

Thread: Guess my dyno HP

Hybrid View

  1. #1
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754

    Guess my dyno HP

    I am having my car dyno’d for the very first time next Friday. I will get 40 minutes of dyno time which comes out to about 8-10 pulls. Take a guess at my dyno RWHP (if nobody guesses the exact number, then closest wins). The dyno number I will use will be from the very 1st pull.

    Here are current mods: (*note some of these mods may or may not increase HP, I am just listing everything just in case).

    BBK Long Tube Ceramic Headers
    BBK H-pipe with hi flow cats
    Flowmaster American Thunder Cat-back
    BBK Cold Air Intake
    BBK 255lhp Fuel Pump
    FRRP 3.73 Gears
    Ford Cobra Upper and Lower Intake (not ported)
    Stock heads
    Stock Throttle Body
    Stock MAF
    Stock 19lb Injectors
    Stock timing chain

    Factory stock 1993 LX Convertible = 205 HP (at the crank). I am not sure what the RWHP would be, but I would guess around 175 HP
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  2. #2
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    I thought the stock crank HP should be 225. My guess will be 172 RWHP.

    I can't begin to guess as to why on earth you would want to try and do 8-10 pulls in 40 min. unless you are just trying to see how heat soaked you can get the engine.
    Last edited by Viper_ed; 09-21-2007 at 10:14 AM.

  3. #3
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by Viper_ed View Post
    I thought the stock crank HP should be 225. My guess will be 189 RWHP.

    I can't begin to guess as to why on earth you would want to try and do 8-10 pulls in 40 min. unless you are just trying to see how heat soaked you can get the engine.

    Not sure if I will get 8-10 pulls in. I'd be happy with 2 or 3 for a baseline.

    1993 (not sure of other years) they lowered the HP rating to 205
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  4. #4
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by RUSH2112 View Post
    1993 (not sure of other years) they lowered the HP rating to 205
    Never heard that. I thought they were all 225hp and 300tq.

  5. #5
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by Viper_ed View Post
    Never heard that. I thought they were all 225hp and 300tq.
    Quoted from this site: http://mustangforums.com/timeline/1993-ford-mustang/

    "The Mustang's horsepower was lower in 1993 than in the rest of the preceding '90s, which really had more to do with how Ford began measuring horsepower rather than an actual reduction in horsepower. In fact, the 1990-93 5.0 LX Mustangs all had the same horsepower. The public had a difficult time understanding this, but there were really no changes made. There were some other small changes made to the engine from 1987-1990 that were never measured in the horsepower so this, too, made up for part of the misconception regarding the change in Mustang's horsepower for 1993."
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  6. #6
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    i M GONNA GUESS 205rwhp
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  7. #7
    Senior Member coralcoupe1993's Avatar
    Join Date
    Sep 2006
    Location
    Robinson
    Posts
    3,842
    Quote Originally Posted by Viper_ed View Post
    Never heard that. I thought they were all 225hp and 300tq.
    They lowered it when they went away from Forged pistons
    87 GT
    93 Notch
    60 Country Sedan
    Fairlanes/Galaxies 59-68
    67 Contiental 4 door
    06 Powerstroke

  8. #8
    Senior Member coralcoupe1993's Avatar
    Join Date
    Sep 2006
    Location
    Robinson
    Posts
    3,842
    182-190
    87 GT
    93 Notch
    60 Country Sedan
    Fairlanes/Galaxies 59-68
    67 Contiental 4 door
    06 Powerstroke

Similar Threads

  1. I guess texas has had enough
    By wick in forum The Bar
    Replies: 25
    Last Post: 11-13-2012, 09:50 PM
  2. Turbo 427 NA engine dyno guess
    By biminiLX in forum Fox-SN95
    Replies: 34
    Last Post: 06-13-2011, 11:12 PM
  3. Guess That Connector!!
    By Black87GT in forum General Tech
    Replies: 4
    Last Post: 09-06-2008, 07:56 PM
  4. any guess on my 1/4 times?
    By PunisherStang in forum The Bar
    Replies: 16
    Last Post: 06-12-2008, 06:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •