Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: FS: Misc. Fox Parts & Pontiac Wheels

  1. #1
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331

    FS: Misc. Fox Parts & Pontiac Wheels

    up for sale is a bunch of misc. fox parts. i have no use for any of them they have just been laying around in my garage time to make some room! sorry i havent had alot of free time lately didn't get a chance to clean up any of the parts so bear with me. im not lookin to make a fortune just clear up some space. i also have a comp. thats not pictured. its out of a 5.0(A9L). -Any Parts That Were Listed Without A Price Make An Offer-

    Driver and passenger doors off of an LX Hatch. Good condition minimal surface rust nothing major.one is setup for power and the other manual $50 each





    Glass out of a hatch. no chips or cracks. just your normal rear hatch window. Make Offer

    Quarter Windows Out of a Hatch. Good Condition. rubber molding around the edges is a little dry rotted from the sun.$100 o.b.o.


    Stock 5.0 Valve Covers from an 88. Maker Offer

    Distributor from an 88 and a stock crossmember exhaust hanger from an 85 GT

    Upper and Lower Intake from an 88. lower intaake has overspray but you can see how well it did clean up. Make Offer

    Stock Headers from an 88. Make Offer

    Last is a set of Pontiac Wheels. not sure what these were off of but appear to be from the 70's or so. Measures 14x6. Make Offer













    wings west body kit that will fit 87-93 mustangs..don't see why it wouldn't fit the earlier fox bodies but not 100 percent sure. its in pretty good shape. they kit basically adds on to the stock bumpers.starts where the moldings are on the car. the side skirts are good with no damage. the front piece has a few nicks on the inner part of the fog light hole. i don't think you can really tell in the one pic though. and towards the top it is flexed inward(not sure if anything can be done to that). the back bumper is still on the car and has the cutouts for dual exhaust. rear bumper is in good condition.125 o.b.o. any questions feel free to ask
    Last edited by TheGreatWhite; 10-04-2007 at 02:37 PM.
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  2. #2
    Member badstanglx's Avatar
    Join Date
    Aug 2007
    Location
    altoona
    Posts
    676
    Who In The Hell Puts A (fart Can!!!!!) On A Mustang

  3. #3
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    the body kit actually belongs to a friend of mine and i threw it on here with all my stuff. i know i know he just wouldn't listen
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  4. #4
    Pontiac Rally II wheels are from a Lemans/GTO. The red "PMD" centercaps are hard to find. I would recommend throwing the Rally IIs on Ebay.

    I had a 70 GTO that came with these wheels. I took mine off and used 14"X 7" Firebird wheels instead. The 14" x 6" should be desireable for GTO/Lemans collectors

  5. #5
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    how much for the computer

  6. #6
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    Thanks for the info donstang86. and fastfox im pending a sale right now on that computer but if something falls through i will let you know
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  7. #7
    Super Moderator u1arunit's Avatar
    Join Date
    Aug 2006
    Location
    Pittsburgh, PA
    Posts
    3,356
    Quote Originally Posted by Donstang86 View Post
    Pontiac Rally II wheels are from a Lemans/GTO. The red "PMD" centercaps are hard to find. I would recommend throwing the Rally IIs on Ebay.

    I had a 70 GTO that came with these wheels. I took mine off and used 14"X 7" Firebird wheels instead. The 14" x 6" should be desireable for GTO/Lemans collectors
    Absolutely! I had a '71 Pontiac Lemans Sport and this stuff was rare 15+ years ago! Don't give it away, go with ebay like Donstang says.
    Mark
    LeMans Blue Z06

  8. #8
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    bump
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  9. #9
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    How much for the two side ground effects?

  10. #10
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    60 for the side skirts
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  11. #11
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    TTT This stuff needs to go someone make these parts useful instead of lying around!!
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  12. #12
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    I still didn't get the pictures of the side skirts.

  13. #13
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    i actually deleted them off my computer and had to re-take them which i just finished doing. you should have a PM
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  14. #14
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by TheGreatWhite View Post
    i actually deleted them off my computer and had to re-take them which i just finished doing. you should have a PM
    I got them, PM returned.

    Are they just held on with double-sided tape, or do they attach to the metal strips like the factory GT ground effects?

  15. #15
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    the car that they were taken off of they were held on by a mixture of double sided tape and screws
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  16. #16
    Senior Member
    Join Date
    Aug 2007
    Posts
    309

    body kit

    would you take 75.00 for the body kit?

  17. #17
    Senior Member
    Join Date
    Aug 2007
    Posts
    309

    ground effects

    would you take 75.00 for the body kit?

  18. #18
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    Passenger Door-SOLD
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

  19. #19
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    do u still have the a9l if so let me know

  20. #20
    Ninja
    Join Date
    Feb 2007
    Location
    Cranberry
    Posts
    331
    sorry i forgot to add that

    5.0 a9l Computer-SOLD
    1985 Mustang GT:Cobra r's.full exhaust.8.8 w/ 3.73's.forged 306 c.i..

Similar Threads

  1. Replies: 0
    Last Post: 04-13-2013, 02:36 PM
  2. Wanted: Misc. engine & exhaust parts for 93 5.0
    By Sonic03snake in forum Ford Parts
    Replies: 16
    Last Post: 03-28-2011, 06:20 PM
  3. Few misc Fox parts F/S-F/T
    By BADASSPONY in forum Ford Vehicles
    Replies: 9
    Last Post: 11-22-2009, 09:39 AM
  4. Misc. Fox parts
    By frankstang in forum Ford Vehicles
    Replies: 7
    Last Post: 08-31-2009, 07:04 PM
  5. misc. fox parts
    By INSANELY CRAZY in forum Ford Vehicles
    Replies: 5
    Last Post: 09-08-2006, 07:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •