SO, I went out and bought a hairdryer

**George C** · 10-03-2007, 11:49 PM

today this showed up, PT88...which is a 88mm turbo with a .75 AR intake side and .96 AR exhaust side. t4 flange.. capable of 1250hp

**Mitternacht** · 10-03-2007, 11:53 PM

Holy hell.....I like it!

**Rodeheaver's** · 10-04-2007, 12:08 AM

what are you gonna do with that???? you must be building a bull dozer lol.

**George C** · 10-04-2007, 12:18 AM

Originally Posted by Rodeheaver's

what are you gonna do with that???? you must be building a bull dozer lol.

going on my 408

**coralcoupe1993** · 10-04-2007, 09:40 AM

That is big!

**Killercanary** · 10-04-2007, 09:42 AM

Nice! I wasn't aware that there was a T88 available with a T4 flange. Even with the .96 A/R won't the T4 flange be a pretty big restriction for a 408. Precision told me it'd be too small if I had 363ci, thus the reason I went with a 331.

**George C** · 10-04-2007, 10:11 AM

Originally Posted by Killercanary

Nice! I wasn't aware that there was a T88 available with a T4 flange. Even with the .96 A/R won't the T4 flange be a pretty big restriction for a 408. Precision told me it'd be too small if I had 363ci, thus the reason I went with a 331.

that is the turbo Parish ran on his 408 and made 1011rwhp and 1090rwtq, not sure if its that much of a restriction or not

**Viper_ed** · 10-04-2007, 10:13 AM

They are becoming more common Paul and work very well. I think there is some class that limits you to a T4 flange which is what prompted the creation of these turbo's.

**Stangman701** · 10-04-2007, 12:41 PM

Originally Posted by Quik

that is the turbo Parish ran on his 408 and made 1011rwhp and 1090rwtq, not sure if its that much of a restriction or not

Didn't he have twins when he made those #'s? I know he does now at least. Either way, if your truck turns out anything like his it'll be bad ass

**393rag** · 10-04-2007, 12:47 PM

Wow, strong Val Kilmer in the last pic...and nice turbo too.

**George C** · 10-04-2007, 12:53 PM

Originally Posted by Stangman701

Didn't he have twins when he made those #'s? I know he does now at least. Either way, if your truck turns out anything like his it'll be bad ass

his 1011rwhp 1090rwtq was a PT88. yes has twins now

heres the video of his dyno runs with the PT88
http://www.youtube.com/watch?v=uOm-16y8NqM

i should be real similar to his numbers. he was 8.8cr and im shooting for 9.1
had stock intake, ill be using a ls2 intake and ported heads. he went thru a heavy 4L80 trans/transfercase with alot of drivetrain loss, ill be going thru a 6speed with less drivetrain loss

my internals are all lunati top of line, so i should be good

**George C** · 10-04-2007, 12:55 PM

Originally Posted by 393rag

Wow, strong Val Kilmer in the last pic...and nice turbo too.

i hear that alot, actually way to much lol. except hes like 5'7" and im 6'1"

**Stangman701** · 10-04-2007, 01:28 PM

Originally Posted by Quik

his 1011rwhp 1090rwtq was a PT88. yes has twins now

heres the video of his dyno runs with the PT88
http://www.youtube.com/watch?v=uOm-16y8NqM

i should be real similar to his numbers. he was 8.8cr and im shooting for 9.1
had stock intake, ill be using a ls2 intake and ported heads. he went thru a heavy 4L80 trans/transfercase with alot of drivetrain loss, ill be going thru a 6speed with less drivetrain loss

my internals are all lunati top of line, so i should be good

I've seen that a few times, forgot that he only had one turbo then. I'd like to know how the hell he's pulling off 26 psi with pump gas. He must have the timing set at 0* or something

**George C** · 10-04-2007, 01:38 PM

Originally Posted by Stangman701

I've seen that a few times, forgot that he only had one turbo then. I'd like to know how the hell he's pulling off 26 psi with pump gas. He must have the timing set at 0* or something

think he runs 15* timing. our motors NA see about 28* or so on average but not sure exactly the timing for that pull

**Sonic03snake** · 10-04-2007, 03:27 PM

Thread has been cleaned. Keep it on topic or there will be a 30 day ban for who ever can't!!!!!

**George C** · 10-04-2007, 04:34 PM

Originally Posted by Domination

For once George wasn't the focal point of his thread getting out of controll, lol!

Nice turbo! good luck on the build, and I'll have those heads ported as soon as possible!

sweet!!! i cant wait till this gets started..just have to catch up alittle more so i can get more parts. catch up then get more parts, catch up then get more parts......seems like a never ending situation

**mineralrob** · 10-04-2007, 06:10 PM

Looks good. Any idea on when your going to have it finished??spring?etc.

**shawnsvtcobra** · 10-05-2007, 12:59 PM

Sweet turbo man,congrats.

**Bluemeanietsi** · 10-05-2007, 01:19 PM

Originally Posted by Quik

sweet!!! i cant wait till this gets started..just have to catch up alittle more so i can get more parts. catch up then get more parts, catch up then get more parts......seems like a never ending situation

so what we doin about aesthetics? ;P