skinny problem

[scott5]

I have the set of my slicks and skinnys but the problem is the fronts will not fit on cause the brakes are too big.. Anyone know what size spacer will allow me to run the 15x3.5 in skinny up front? I really do not want to grind any part of my brakes.

[92306gt]

I have the set of my slicks and skinnys but the problem is the fronts will not fit on cause the brakes are too big.. Anyone know what size spacer will allow me to run the 15x3.5 in skinny up front? I really do not want to grind any part of my brakes.

dont be scared, get the grinder out!

[ThrashN]

I think 7/16 will do the trick

[George C]

get a grinder

[Pure Stock]

Better yet get these http://www.aerospacecomponents.com/front_brake_kits.htm

[Rio94gt]

Need some grinding and a spacer. It will work fine then. I think its a 5/8 spacer.

[Sonic03snake]

I think 7/16 will do the trick

Should have them hanging on the wall at the shop. That is what we used on Rio's car.

[scott5]

Should have them hanging on the wall at the shop. That is what we used on Rio's car.

we tried those and they didnt work? It still hit

[Viper_ed]

we tried those and they didnt work? It still hit

You need to grind that bar off the front of the caliper and it will fit fine with that spacer.