1989 Stang GT Parts and other 302 parts

[Evolver103]

I have lots of parts for sale so if any one is interested make me an offer. E-mail me at evolver103@aol.com or you can call 412-780-8735 ask for Mike

Parts:
I am selling an AOD transmission with only 100 miles.
B&M Torque converter I think it is a 2500 Stall.
Aod Shift Kit.
Weiand Excelerator aluminum single plane intake manifold for carberated 302 with carb spacer.
302 Block that has been hot tanked and is ready to be bulilt.
Performance alminum water pump Edelbrock EDL-8045 for 1986-1993 5.0L 302.
I also have a couple lunati cams lying around one is brand new in box for 302.
Stock 5.0L fuel injection intake manifold and throttle body.
Also I got a another 302 block that needs machine work I will throw in if some one buys good block.
I also got almost every gasket know to man for the 302 so if any one is looking for a gasket let me know.
Also have High flow cyclinder heads off of 89 gt and a set of regular 302 cyclinder heads off a licoln motor.

Just trying to get rid of things beacuse I need more space in my garage.

[wick]

Need a GT-40/cobra gasket. You have one?

[coralcoupe1993]

Do you have any specs on the cams?

[Evolver103]

Sorry I don't have a Gt40/Cobra gasket.

[Evolver103]

Here are the specs on the lunati cam I have.

Brand:Lunati
Product Line:Lunati Hydraulic Roller Tappet Camshafts
Part Type:Camshafts
Cam Style:Hydraulic roller tappet
Basic Operating RPM Range:2,200-6,200
Intake Duration at 050 inch Lift:224
Exhaust Duration at 050 inch Lift:232
Duration at 050 inch Lift:224 int./232 exh.
Advertised Intake Duration:284
Advertised Exhaust Duration:290
Advertised Duration:284 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.535 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.544 in.
Valve Lift with Factory Rocker Arm Ratio:0.535 int./0.544 exh.
liftLobe Separation (degrees):112Intake Valve Lash:0.000 in.
Exhaust Valve Lash:0.000 in.
Computer Controlled Compatible:No

[89 vert]

What type of heads are they?

[Evolver103]

What type of heads are they?

I have two sets of cylinder heads.

I have a set of factory 5.0L HO Steel Heads off of 1989 Mustang Gt.

I also have a set of cylinder heads off of linclon motor they are just plane jane steel heads.

[tjvantana]

what do you want for the weiand intake

[Evolver103]

what do you want for the weiand intake

This weiand intake new costs $179.95. I will take $80 for weiand intake manifold.

[RUSH2112]

Need a GT-40/cobra gasket. You have one?

Wick - are you referring to the head gasket?
I have a cobra intake gasket, new

[Evolver103]

I was referring to the intake gasket I do not have the gt40/cobra intake gasket.

[Evolver103]

Still Looking to clear out my garage e-mail me if you need anything

[wick]

Wick - are you referring to the head gasket?
I have a cobra intake gasket, new

Naw Don. I need the upper to lower gasket. You have that one?

[Evolver103]

Naw Don. I need the upper to lower gasket. You have that one?

The only intake gasket I have is the performer rpm upper intake manifold and lower gasket manifold gasket.

[RUSH2112]

Naw Don. I need the upper to lower gasket. You have that one?

If you are referring to the upper to lower gasket for the cobra intake, I might have that. Let me check and get back to you.

[onenastytbird]

you've got mail

[tjvantana]

still have the stock intake?

[Killercanary]

This thread is almost a year old JFYI.

[pwtmxracing]

what do u want for the block