Results 1 to 4 of 4

Thread: Meth Injection a N/A

  1. #1
    Member
    Join Date
    Aug 2006
    Location
    California, PA
    Posts
    31

    Meth Injection a N/A

    i asked this question on modularfords.com, which i hate by the way, but would it be advantagious to install a meth injection kit on a N/A car? I would like to put one on my mach but i didn't know if it was worth. Snow performance makes a kit for N/A cars. So?

  2. #2
    2.4 KB & Juice
    Join Date
    Aug 2006
    Location
    Export, PA
    Posts
    844
    Don't know alot about it, but I've only seen it make big increases from non-intercooled cars.....for what the kit cost, why not try it and see the results..doesn't hurt!
    07 Silverado
    05 R6

    Sold: 03 Cobra, Built motor - 2.4 KB - N2O

  3. #3
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Pure Stock will be the one to chime in on a N/A combo.

  4. #4
    Member mlowry1260's Avatar
    Join Date
    Aug 2006
    Location
    Caledonia, Ontario
    Posts
    620
    I would think you would see little benfit unless you had a high compression motor or were limited to 91 or 87 octane on a race type motor. Most of the cars use it to lower air inlet temps due to the heat of compression caused by the blowers or turbos. If you have pinging issue it may help. I would not expect any great HP gains like the boosted cars can achieve with additional timing run with lower air charge temps.
    Mark Lowry


    Wolfpack Speed, Inc.
    4290 Campbells Run Rd
    Pittsburgh, PA 15205
    (412) 279-4902

Similar Threads

  1. Coolingmist meth/alcohol injection setup
    By silverworm in forum Ford Vehicles
    Replies: 2
    Last Post: 11-15-2012, 08:09 PM
  2. aftercooler or snow meth kit?
    By 1badnotch in forum SN95-New Edge
    Replies: 9
    Last Post: 07-20-2011, 08:51 PM
  3. SCT MAF in a 3" pipe and meth injection?
    By Jivepepper in forum General Tech
    Replies: 5
    Last Post: 04-02-2011, 04:57 PM
  4. 2.3 Dyno + Meth injection
    By Martin0660 in forum Fox-SN95
    Replies: 2
    Last Post: 02-25-2010, 06:26 PM
  5. WTB Water/meth injection kit.
    By John4cam in forum Ford Parts
    Replies: 0
    Last Post: 10-31-2009, 01:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •