Witch Headgasket?

[92306gt]

i know a lot of you guys are useing nitrous on your stangs and i was wondering witch headgaskets i should use if i were to spray, say a 150 shot? i have another car that im putting a s trim on, so witch head gasket would i use for that car?

[Rodeheaver's]

Either a 1011-2 felpro, or just go with a cometic

[mlowry1260]

Don't use cometic gaskets unless you are doing a total rebuild. Why, because they require a much smoother block & head surfaces than a traditional graphite head gasket. They will leak on a rough deck surface.

ROL makes a nice high temp graphite gasket w/stainless fire rings. HG32841HT

Mr. Gasket Solicur #5809 is another nice graphite head gasket.

[Rodeheaver's]

i have had really good luck with mr gasket head gaskets on N2O cars... and they are really inexpensive..

[92306gt]

Either a 1011-2 felpro, or just go with a cometic

Sweet...when i built my 306 i put the felpro 1011-2 headgaskets on. i guess ill do the same on the other motor too. thanks

[SK@StreetLethal]

I really like the fel pro 9333 pt1's. There a very good gasket.

[wick]

What comes in the kit from summit? The ford racing kit that is in the mustang section.

[SK@StreetLethal]

I know there fel pro gaskets. My guess is that they would be the 8548 gaskets

[gmkillr]

I really like the fel pro 9333 pt1's. There a very good gasket.

I like mine, im throwing 20+ lbs of boost at them now w/ NO problems!

[SK@StreetLethal]

Exactly they are the gaskets I used on my turbo charged fairmont and they held up great. I used them on the current nitrous set up in my lx and I've never had any head gasket issues.