can you advance or degree a cam with out taking the rockers and lifters out or can you just put a wrench on the cam bolt and turn it?
can you advance or degree a cam with out taking the rockers and lifters out or can you just put a wrench on the cam bolt and turn it?
Generally you need to loosen the valve train. Is the cam timing out?
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
no its not coming out. i just found that the timing marks were not lined up on the car thats why i cant get it started.Originally Posted by wick
Last edited by 92306gt; 11-19-2007 at 10:49 PM.
Not lined up as in how? With the marks on the front cover? You could turn the key and jump the relay with a screw driver if you dont have a helper. All this while turning the dist. to get the thing to start. It could be out a tooth or two and not allowing enough movement either way.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Ouch how you didnt rebend the valves
89 Mustang (stock) DD
82 Trans Am (not stock)
98 Audi A4 (not so hurting)
i got it lined back up and put it all together and it still wont start, doesnt even try to start. did i mention i HATE this car?:mad1:
Posting Permissions
Reply With Quote
Bookmarks