What Mark 7 parts to pull?

[DRRummel]

I stumbled across a 1990 Mark 7 LSC in the salvage yard today. What parts should I pull?
The rear is an okay rear for a 5 lug conversion.
What the front hubs?

I heard it has a great ABS setup on it. Can that be used?

The engine is just another 5.0 HO, right? No need to pull that.

[Martin0660]

The lincoln brake parts are a way to rear disc's and 5 lugs, but both the front and rear create problems.

The rear need the Lincoln axles that are 1.25" longer (per corner) than a normal fox. This will create all kind of wheel fitment issues although SN95 stuff works. Get the axles, ALL the brackets, and then you will still need early cobra / SVO e-brake cable to make that work.

The front has great 5 lug rotors, 73mm Calipers, BUT the hub is big and sticks out, and creates wheel fitment issues. Basically if you are putting this stuff on a fox, wheel choices get real slim. The rotors and calipers will bolt up to a fox spindle as a bright spot, and the calipers used to be a popular upgrade (bigger piston)

I think the ABS on those is the early TEV's system, but am not sure any more.

If I was going to convert to 5 lug, I would do the SN95 stuff myself. That would only add .75" a corner over the fox stuff.

Bob Myers

[DRRummel]

I have a Baer Big Brake setup waiting to be installed. I was just wondering if I should pull these parts for other Mustang people.

I have no idea what a TEV ABS system is. I have seen two remarks that the Mark 7's ABS was better then the Mustangs. (no early engagement)

[gmkillr]

The electric fan setup is suppose to be one of the best there is.
Its suppose to be 4500cfm.

[sweeney1030]

Id like to get a set of the mesh 16x7 rims .if they are there they look like trans-am GTA wheels , bbs type ; if they are available let me know -- thanks

[DRRummel]

The electric fan setup is suppose to be one of the best there is.
Its suppose to be 4500cfm.

I forgot about that item. Unfortately ths LSC rearended someone. That fan is hidden in the mangled metal.

[DRRummel]

Id like to get a set of the mesh 16x7 rims .if they are there they look like trans-am GTA wheels , bbs type ; if they are available let me know -- thanks

They are all there. I did not check for curb rash. They do have lug locks on them. If the key is there, I will try to pull them for you. If I only get two off the car, do you still want them? No spare, I grabbed it for my future 5 lug conversion. If you want to fight them off the car your self, PM me and I will you directions to the salvage yard. (in Baltimore)