Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 65

Thread: What will it run?

  1. #21
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by fastfox91 View Post
    if u leave on hard on slicks and shift well enough high 13's are their but if not low to 14's
    You must be joking.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  2. #22
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    no im not since u ask ive seen many near stock 5.0 gt foxes with gears and slicks and un gutted running high 13's on slicks at beaver which is a slow track but that is what they run for the most part. 13.8's@102 some were in that range.

  3. #23
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by fastfox91 View Post
    no im not since u ask ive seen many near stock 5.0 gt foxes with gears and slicks and un gutted running high 13's on slicks at beaver which is a slow track but that is what they run for the most part. 13.8's@102 some were in that range.
    Well, if there trapping 102-103 and hitting high 13's with slicks they need to hang the third pedal up and put one of those slushboxes in 'em, cause that's pathetic.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  4. #24
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    I'll just throw in my personal experience. I had a 90 gt with the following.. flowmasters, h pipe, 2.73 gears, k&N in air box, short shifter, stock everything else. and I was going 14.2 at cecil county, and 14.4 at Beaver Springs. Thats on a street tire cutting 2.2 60's. So make your own guesses, but i'd say on your best pass, depending on the track you could run a 13.4-13.7
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  5. #25
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    Quote Originally Posted by Pure Stock View Post
    Well, if there trapping 102-103 and hitting high 13's with slicks they need to hang the third pedal up and put one of those slushboxes in 'em, cause that's pathetic.
    show me someone who's hitting 102-103mph on a basically stock mustang??? unless they are driving a stripped out car like you.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  6. #26
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by MillCreekMafia View Post
    show me someone who's hitting 102-103mph on a basically stock mustang??? unless they are driving a stripped out car like you.
    Here's one running 106.92

    http://www.steelcitystangs.com/forum...ead.php?t=6389

    And so what if it's lightened, it's still a stock long block anyway.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  7. #27
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Stock long block trapping 108.32

    -Not gutted like my P.O.S.

    I can hear it now, "There's no way a *stock* 5-Liter can do that"
    Attached Images Attached Images
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  8. #28
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    My stock longblock went 106.15 N/A @ a weight of 3350.
    I was cutting 1.71-1.72 60' times on Nito drag radials.
    Just because you cant do it dosent mean it cant be done!
    Corvette Z06

    Growing up.............Not everyone does it!


  9. #29
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Here's another example from the corral. It ain't gutted either;)

    http://www.corral.net/forums/showthread.php?t=778135

    I'll stop now.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  10. #30
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by gmkillr View Post
    My stock longblock went 106.15 N/A @ a weight of 3350.
    I was cutting 1.71-1.72 60' times on Nito drag radials.
    Just because you cant do it dosent mean it cant be done!
    I don't believe it, your buggy was a skeleton. Especially @ 3,350 lbs.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  11. #31
    mid 13's should be easy. low-low 13's if you can drive. .
    1969 Camaro restomod/project
    1967 camaro
    2011 mustang procharged
    93 reef blue notch blk/int
    92 calypso notch blk/int
    86 t-type
    1972 chevelle project
    Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.

  12. #32
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    Quote Originally Posted by Pure Stock View Post
    Here's one running 106.92

    http://www.steelcitystangs.com/forum...ead.php?t=6389

    And so what if it's lightened, it's still a stock long block anyway.
    we are not talking about a gutted car in this thread we are talking about a full weight gt. i have a 91 gt when i got it had 4:10's, a bullshit upper box intake from cartech, and the a/c and smog were elim, underdrives, and that was it car ran 13.9x on a 1.8 60's on a 26x8.5 slick at beaver 5,500 rpm launches and yes i can shift very well u can ask some of the people on this site whlstndr, mcm, delldoe,ocr racing,91ntchlx, so yea their are some cars out their that are fluke low 13's stockers running around but 9 out of 10 they are high 13 second cars.

  13. #33
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by fastfox91 View Post
    we are not talking about a gutted car in this thread we are talking about a full weight gt. i have a 91 gt when i got it had 4:10's, a bullshit upper box intake from cartech, and the a/c and smog were elim, underdrives, and that was it car ran 13.9x on a 1.8 60's on a 26x8.5 slick at beaver 5,500 rpm launches and yes i can shift very well u can ask some of the people on this site whlstndr, mcm, delldoe,ocr racing,91ntchlx, so yea their are some cars out their that are fluke low 13's stockers running around but 9 out of 10 they are high 13 second cars.
    Let me put this in perspective. I had an 86 Mustang GT 5-speed. 2.73's (not a typographical error) Absolutely NO weight reduction I weigh 205 lbs. This example had 28,xxx original miles. It had 3 and only 3 mods.

    Mods:
    * air silencer removed
    * advanced timing
    * serpentine belt delete.

    Traction was courtesy of Pep Boys 420 tread wear 225/60/15 radials.

    With only those mods in a pig 200 H.P. 86 5-Liter @ PRP (not exactly a mine shaft track)

    It went back to back to back 13.9x's. No fluke by any means.

    Now your trying to tell me an 87 with more H.P. from the gate, full exhaust, gears, slicks, intake, and some other mods is at best going to match that performance I got out of that 86?

    C'mon man, I've been at this for more than a minute
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  14. #34
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by Pure Stock View Post
    Let me put this in perspective. I had an 86 Mustang GT 5-speed. 2.73's (not a typographical error) Absolutely NO weight reduction I weigh 205 lbs. This example had 28,xxx original miles. It had 3 and only 3 mods.

    Mods:
    * air silencer removed
    * advanced timing
    * serpentine belt delete.

    Traction was courtesy of Pep Boys 420 tread wear 225/60/15 radials.

    With only those mods in a pig 200 H.P. 86 5-Liter @ PRP (not exactly a mine shaft track)

    It went back to back to back 13.9x's. No fluke by any means.

    Now your trying to tell me an 87 with more H.P. from the gate, full exhaust, gears, slicks, intake, and some other mods is at best going to match that performance I got out of that 86?

    C'mon man, I've been at this for more than a minute
    I was there to see it too. The previous owner of my 88 GT T-top car went 13.78 in the T-top car, full weight, radial tires and all factory original exhaust with only the belt pulled.

  15. #35
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    Seems like unless these foxes come from the mid mon valley they dont run for shit!....LOL.....Must have been all that practice we had back in the day on "The new road".......

  16. #36
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    I think the "DRIVER MOD" is the most important thing to consider here.

    If that mod is correct low 13's should be no problem.

  17. #37
    EVERYTHING'S FOR SALE 92306gt's Avatar
    Join Date
    Jul 2007
    Location
    Mt Pleasant
    Posts
    2,916
    Quote Originally Posted by cam303 View Post
    I think the "DRIVER MOD" is the most important thing to consider here.

    If that mod is correct low 13's should be no problem.
    very good point! ive driven many of my friends cars at the track and usually pull atleast 5 tenth faster.

  18. #38
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    Pure Stock, We have two diffferent opinions of stock cars. I'm not talking stock long block with the rest of the car tweaked to the moon. I'm talking stock like a flowmaster cat back and a air filter. As for your post above with the 13.9, I totally believe it, and nice time, but i'm talking the norm.. most people are going to run like 95-98mph and somewhere in the 14's.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  19. #39
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by MillCreekMafia View Post
    Pure Stock, We have two diffferent opinions of stock cars. I'm not talking stock long block with the rest of the car tweaked to the moon. I'm talking stock like a flowmaster cat back and a air filter. As for your post above with the 13.9, I totally believe it, and nice time, but i'm talking the norm.. most people are going to run like 95-98mph and somewhere in the 14's.


    "What will it run?

    --------------------------------------------------------------------------------

    Well, i didnt get any time to take my car to the track, and ive been slowly adding performance partsand was wondering what you guys think my car should run (with no traction issue, or driver error) lol

    list of mods in sig

    Thanks!
    __________________
    1987 Mustang GT- (Black) BBK long tube headers, 2.5" Flowmaster Exhaust, No catalytic convertors, 3:73 Gears, Hurst short throw shifter, underdrive pullys, Weld racing wheels, Skinnies on the front, Slicks on the back,bbk o/r hpipe, zoom stage 3 clutch/flywheel, Cobra upper/lower intake manifold, More to come!!"


    *First off, I was commenting on this gentleman's potential e.t. As cam303 stated, all drivers have different abilities and with a manual trans. a lot of variance can be experienced.*

    "no im not since u ask ive seen many near stock 5.0 gt foxes with gears and slicks and un gutted running high 13's on slicks at beaver which is a slow track but that is what they run for the most part. 13.8's@102 some were in that range."

    *This member here then posts a trap speed of 102 mph "many near stock 5.0 gt foxes with gears and slicks and ungutted running high 13's on slicks" He also states they are trapping 102. That trap speed is good for 13.2's all day long if not better.*

    "show me someone who's hitting 102-103mph on a basically stock mustang??? unless they are driving a stripped out car like you."

    *You then want to call me out about showing cars that trap 102-103. Why me? I was simply commenting on the potential of 102 mph. High 13's@102 is inefficient as hell. If that strikes a nerve with you, deal with it.*

    And for the record, I have trapped 102+ @ full weight in a fox body with full exhaust, gears, pulleys, adv. timing, air silencer removed, on 225/50/15 radials and pulled a 13.3 out of it. I'll leave it up to the car and driver and road and track yuppies with there fifth wheel to run 98 mph in a fox.
    Last edited by Pure Stock; 11-30-2007 at 01:04 AM.
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  20. #40
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    In conclusion, The creator of this thread has the *potential* to attain low 13 sec. e.t.'s based on what I have accomplished and helped others to do. These are objective results gentleman. Not some guess, based on what others have *NOT* accomplished. The basis of my comments are to provide insight based on "REAL WORLD EXPERIENCE" Good Luck Black87GT
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

Similar Threads

  1. Cannonball run II
    By mustang50lx in forum The Bar
    Replies: 1
    Last Post: 07-14-2010, 10:06 PM
  2. Hit and Run
    By 95riosnake in forum The Bar
    Replies: 37
    Last Post: 10-21-2009, 06:50 AM
  3. Getting it to run right
    By Tony71502 in forum The Bar
    Replies: 22
    Last Post: 09-23-2009, 03:35 PM
  4. anyone run 335/30/18??
    By 2001GTTT in forum General Tech
    Replies: 30
    Last Post: 09-22-2009, 03:44 PM
  5. 10.60 Run
    By burntire in forum Drag Racing
    Replies: 10
    Last Post: 11-30-2008, 01:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •