Results 1 to 20 of 20

Thread: FS: 76mm C&L MAF and #30 Ford Injectors

  1. 12-21-2007, 12:47 PM #1
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754

    FS: 76mm C&L MAF and #30 Ford Injectors

    These are brand new. They were installed, but I have switched to a different setup. There is only 200 miles on these parts and considered to be in excellent condition.

    I am posting this now because I want it to be on record that the parts are new and have only 200 miles on them at this current time. HOWEVER....

    The parts will not be ready to be sold till end of January/Mid February.

    They are currently installed on my car, but I am dropping the car off tonight to have a restoration paint job that will take 3-4 weeks. The parts will remain on the car and have no more miles or usage put on them for the next month. (other than to drive the car home after the paint job which is 15-20 minutes from my house)

    C&L 76mm MAF (calibrated for #30 injectors) - $175

    Ford #30 Injectors (Red) - $275

    Both - $400

    If anyone is interested, let me know. For a small deposit, I will hold these for anyone interested, otherwise 1st come, 1st serve.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  2. 12-22-2007, 08:48 PM #2
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    33 views and nobody interested?

    Make offers if your interested
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  3. 12-24-2007, 01:43 PM #3
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    PRICE DROP!!!

    C&L 76mm MAF (calibrated for #30 injectors) - $150

    Ford #30 Injectors (Red) - $250

    Both - $350
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  4. 12-31-2007, 05:31 PM #4
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Anybody want to make an offer at least?
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  5. 01-06-2008, 10:54 PM #5
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    bump
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  6. 01-15-2008, 08:24 AM #6
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    This is a good price and I can't go any lower. I already am losing out on getting my money back. Make an offer
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  7. 03-06-2008, 02:25 PM #7
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    tttt
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  8. 03-17-2008, 09:33 AM #8
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    bump Anyone?
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  9. 03-17-2008, 09:00 PM #9
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    The parts are FINALLY off the car and ready for sale. The injectors look brand new, as does the MAF meter

    C&L 76mm MAF (calibrated for #30 injectors) - $150

    Ford #30 Injectors (Red) - $250

    Both - $350

    C&L 76 Mass Air Meter and (8) Ford #30 Injectors


    (8) Ford #30 Injectors


    C&L 76 Mass Air Meter (black sensor NOT included, calibrated for #30 injectors)
    Last edited by RUSH2112; 03-17-2008 at 09:04 PM.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  10. 02-15-2009, 01:13 PM #10
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by RUSH2112 View Post
    The parts are FINALLY off the car and ready for sale. The injectors look brand new, as does the MAF meter

    C&L 76mm MAF (calibrated for #30 injectors) - $150

    Ford #30 Injectors (Red) - $250

    Both - $350

    C&L 76 Mass Air Meter and (8) Ford #30 Injectors


    (8) Ford #30 Injectors


    C&L 76 Mass Air Meter (black sensor NOT included, calibrated for #30 injectors)
    I still have these parts. Price change below:


    C&L 76mm MAF (calibrated for #30 injectors) - $100

    Ford #30 Injectors (Red) - $175

    Both - $250
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  11. 02-19-2009, 10:02 AM #11
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by RUSH2112 View Post
    I still have these parts. Price change below:


    C&L 76mm MAF (calibrated for #30 injectors) - $100

    Ford #30 Injectors (Red) - $175

    Both - $250

    Prices have dropped. These are 98% like new and a steal at these new prices.


    C&L 76mm MAF (calibrated for #30 injectors) - $75

    Ford #30 Injectors (Red) - $150

    Both - $200
    Last edited by RUSH2112; 02-19-2009 at 10:05 AM. Reason: edit
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  12. 03-09-2009, 12:27 PM #12
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    tttt
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  13. 03-18-2009, 12:55 PM #13
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    tttt
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  14. 03-22-2009, 03:13 PM #14
    Green92LX
    Green92LX is offline
    Member
    Join Date
    Mar 2009
    Posts
    32
    will you take 200 shipped? i'm right in Rhode Island.
    Reply With Quote Reply With Quote
  15. 03-23-2009, 05:35 PM #15
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by Green92LX View Post
    will you take 200 shipped? i'm right in Rhode Island.
    PM sent
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  16. 03-26-2009, 04:13 PM #16
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    tttt
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  17. 03-27-2009, 11:08 PM #17
    chuck94
    chuck94 is offline
    Senior Member
    Join Date
    Mar 2007
    Posts
    817
    i need the mass air how much shipped to 15486
    Reply With Quote Reply With Quote
  18. 03-29-2009, 10:49 AM #18
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by chuck94 View Post
    i need the mass air how much shipped to 15486
    PM sent
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  19. 03-31-2009, 09:11 AM #19
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by chuck94 View Post
    i need the mass air how much shipped to 15486
    Check your PM's dude
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
  20. 04-01-2009, 12:59 PM #20
    RUSH2112
    RUSH2112 is offline
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by chuck94 View Post
    i need the mass air how much shipped to 15486
    Dude, if you don't want it, then let me know. I am waiting for your repsonse.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. maf/injectors questions
    By geps91stang in forum Fox-SN95
    Replies: 6
    Last Post: 07-31-2012, 06:21 PM
  2. injectors and maf
    By geps91stang in forum General Tech
    Replies: 4
    Last Post: 04-08-2011, 01:21 PM
  3. 94/95 C&L 76MM MAF Kit + 24lb injectors
    By 95Vert in forum Ford Vehicles
    Replies: 0
    Last Post: 09-13-2009, 12:26 AM
  4. WTB MAF for 42's, and injectors
    By delldoe in forum Ford Parts
    Replies: 0
    Last Post: 05-30-2008, 10:41 AM
  5. (8)fms 24# injectors and C&l-meter(76mm)
    By went9s in forum Ford Vehicles
    Replies: 0
    Last Post: 10-22-2007, 08:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules