Garage Sale!!

[04yellowcobra]

4.6 2v heads NPI 40
Stock Fox MAF 15
Hydraulic clutch master cylinder and slave (mounting bracket for T-5 in ranger) spare master cylinder 30
(2) stock flywheels (good enough to be surfaced and ran) 20 a piece
28oz flexplate for SBF 35
28oz flywheel recent surface but some surface rust $40
T-5 out of 89 Mustang great shape 350
(2) 205/65/15 goodyear tires great tread 60
(2) nitto 315/35/17 DR shadow of tread left 40
Fox A/C delete kit minus hardware 30
351 TFI distributor 40
Radiator core support dress up piece 25
351 upper/lower EFI from 91 E-250 35
Heads from 91 E-250 iron 20
E7 heads from mustang studded for stud mount roller rockers 40
1/4 window glass for 73-79 F series pickups 15
Grey door sill plates for fox 5
Brand new repo tailgate for 73-79 F series pickups 50
Dash filler for fox 5
Hard fuel lines that run to fuel rails fox 10
stock 2 barrel intake and carb (302) 5
Base plate for 600/650 carb 5
Driveshaft for T-5/8.8 ranger 2wd extended cab. 30
(2) 15x6or7 tuner look wheels 5x4.5 and something else bolt pattern 30
(2) 16" waffle wheels from sn-95 mustangs
Copper 4 core radiator out of V-8 ranger no leaks 50
adjustable clutch cable and svo qlutch quadrant....$45 will seperate
140 mph speedo showing 66k $125
steeda triax shifter handle $20
ford racing coil (slight rust) $20
ford racing black plug wires $30
stock dist with new msd cap $30
17 inch gun metal cobra r wheels ...no tires $250 4 LUG
15 inch 99 mustang v6 wheels with exellent tread (kumo's i think) $125
50/50 lakewood shocks..$50
bbk lowering springs $125
sunroof w/ new weather stripping $175
Mach 1 chin spoiler brand new $100
Bucket seats out of Ranger $50
19 lb injectors (2 or 3 full sets) $20 a set
Coil on plug COP (2 sets) $75 a set
Chrome MAF unknown size with electronics. $20
rear hatch, doors, 1/4 glass plus other misc stuff. pm me if you need something not on here as i probably have it!

Any purchases over 50, I may throw in some free stuff. Need it gone!!

[PunisherStang]

im interested in the tuner wheels pm me a pic and where you located and if you wanna meet up etc.

[04yellowcobra]

I am just outside of Baltimore MD. I do get home to my folks place in Latrobe about once a month or so. Let me know I can throw them in next time I come in.

[phillysrt4]

Is that T5 with or without bell?

[04yellowcobra]

without ... should be sold this weekend. I will let you know.

[phillysrt4]

without ... should be sold this weekend. I will let you know.

its cool... someone replied to my wanted ad and im going to accept it.

[04yellowcobra]

Updated list:

4.6 2v heads NPI 40
Stock Fox MAF 15
Hydraulic clutch master cylinder and slave (mounting bracket for T-5 in ranger) spare master cylinder 30
(2) stock flywheels (good enough to be surfaced and ran) 20 a piece
28oz flexplate for SBF 35
28oz flywheel recent surface but some surface rust $40
T-5 out of 89 Mustang great shape 350
(2) 205/65/15 goodyear tires great tread 60
(2) nitto 315/35/17 DR shadow of tread left 40
Fox A/C delete kit minus hardware 30

Radiator core support dress up piece 25
351 upper/lower EFI from 91 E-250 35
Heads from 91 E-250 iron 20
E7 heads from mustang studded for stud mount roller rockers 40
1/4 window glass for 73-79 F series pickups 15
Grey door sill plates for fox 5
Brand new repo tailgate for 73-79 F series pickups 50
Dash filler for fox 5
Hard fuel lines that run to fuel rails fox 10
stock 2 barrel intake and carb (302) 5
Base plate for 600/650 carb 5

(2) 15x6or7 tuner look wheels 5x4.5 and something else bolt pattern 30
(2) 16" waffle wheels from sn-95 mustangs
Copper 4 core radiator out of V-8 ranger no leaks 50
adjustable clutch cable and svo qlutch quadrant....$45 will seperate
140 mph speedo showing 66k $125

ford racing coil (slight rust) $20
ford racing black plug wires $30
(3) stock dist with new msd cap, stock cap, and no cap $30, 25, 20 respectively
17 inch gun metal cobra r wheels ...no tires $250 4 LUG
15 inch 99 mustang v6 wheels with exellent tread (kumo's i think) $125


sunroof w/ new weather stripping $175
Mach 1 chin spoiler brand new $100
Bucket seats out of Ranger $50
19 lb injectors (2 or 3 full sets) $20 a set
Coil on plug COP (2 sets) $75 a set
Chrome MAF unknown size with electronics. $20
rear hatch, doors, 1/4 glass plus other misc stuff. pm me if you need something not on here as i probably have it!

Any purchases over 50, I may throw in some free stuff. Need it gone!!

[04yellowcobra]

Offers?

[fastfox91]

is the flexplate 157 tooth let me know also it wouldnt happen to be sfi approved would it

[PSPstang]

i am going to try and make it out there to get that cover and see if it works.
with the price of gas, i don't want to make a special trip. would rather stop when when i am out there for a reason.
i'll give dad a ring and see if hes around.

[onenastytbird]

are the flywheels 5.0 or 4.6 flywheels? if 4.6 i may be interested.

[04yellowcobra]

is the flexplate 157 tooth let me know also it wouldnt happen to be sfi approved would it

I do not believe its 157 ... I can count it. It is the stock flywheel from the 91 351W that was orginally in an E250.

Let me know.

[04yellowcobra]

i am going to try and make it out there to get that cover and see if it works.
with the price of gas, i don't want to make a special trip. would rather stop when when i am out there for a reason.
i'll give dad a ring and see if hes around.

No rush man. Dad gets down around pittsburgh with work but I don't know if he can carry it with him.

Keep me posted man ... I hear ya on the gas thing. Thats why my F-150 is forsale!!

Later
Jason

[04yellowcobra]

are the flywheels 5.0 or 4.6 flywheels? if 4.6 i may be interested.

Windsor based pushrod motors.

Thanks

[PSPstang]

just sold my 05 f150 yesterday for that very reason. couldn't afford to drive the damn thing and didn't want it sitting in the driveway depreciating any longer

[Black87GT]

17 inch gun metal cobra r wheels ...no tires $250 4 LUG

Could i get pics of these?

Thanks!

[04yellowcobra]

[Black87GT]

and how many cobra r's do you have?

[04yellowcobra]

There is a full set there (4). They all are in the same shape ... just a very little dirt on them, no damage at all.

[Black87GT]

well im very interested in these, and was wondering if you would be willing to ship them, and how much it would be to do so? to 17870

Thanks