Just some advice for those who have a new edge 99-04 and are thinking about getting a tubular k member. I recently bought a qa1 k member with spring perches hoping that I would be lighter in the front end and would have easy access to header bolts. However, there were a lot of headaches that I ran into. All in all, I would not recommend this product.

Problems:

-this k member pushed out my stock front a arms resulting in my 04 17x9 cobra rims to stick out an inch past the wheel well. Result: steamroller. It limits what wheels you can put on. (I had redo the whole front suspension and put fox body arms on. Those even made puting in springs a real pita)

-this k member does not line up with the motor mount bolts and knubs. The motor sat uneven resulting in my steering shaft rubbing my longtubes. Result: out of control vibrating steering wheel. (I had to cut out an extra hole in the k member mount area so the motor knub would fit in correctly)

-this k member puts your caster way out of wack. I went to get my alignment and my caster was around + 5.5-6. Even with caster/camber plates, the lowest I got down to was +4.8. Result: harder steering and rubbing away my inner lining.

Thanks qa1.

So many headaches which is so unworth it. I have read elsewhere that others have had the same problems. Hopefully this will help out at least one person... or a few.

Stay away from qa1.

QA1 =