Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Thread: Any Ideas?

  1. #1
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365

    Any Ideas?

    Ok im getting to the point where i am beginning to hate my car. Twice today, there is a humming/moaning type noise coming from under the hood, and the rpms dance around, between 200 to 1500, i shut it off and started it and it was fine, it did it again and i just let it go and it went back to normal.

    I have two theories on this.

    1) IAC Valve is acting up, but would this explain the weird noise?

    2) Power Steering Pump making noise but what would account for the rpms?

    Any help is greatly appreciated, thanks guys.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  2. #2
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    didnt u say u busted the bolt off for iac, if u didnt get it out and tighten back up u might have a vac leak

  3. #3
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by fastfox91 View Post
    didnt u say u busted the bolt off for iac, if u didnt get it out and tighten back up u might have a vac leak

    that is a possibility but as far as i know its on there very tight.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  4. #4
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    just did it again....had to turn it off then back on for it to stop....its like a high frequency humming noise, so weird.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  5. #5
    NEWB
    Join Date
    Aug 2006
    Location
    Carnegie
    Posts
    167
    the rpm variation sounds like a vac leak but im not sure what would cause the noise

    did you ever think that it could be two separate problems?
    2001 Black Gt 5spd


    Kenne Bell is my BOY

  6. #6
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by Jcelli04 View Post
    the rpm variation sounds like a vac leak but im not sure what would cause the noise

    did you ever think that it could be two separate problems?

    yes but im deep into denial about it.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  7. #7
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    ...and this is the 2nd or 3rd time you "cleaned" that IAC valve after we told you to buy a new one AND you broke one of the bolts AND you think it's tight enough. Air molecules are really really small. I bet some of them are getting in there where the bolt is broke and the 1/2-assed so-called cleaned IAC is probably acting up.

    If I was your car, I would hate you more than you're hating it right now.

    Fix the bolt and spend $70 clams... get a brand new IAC, anchor it down correctly and report back to us.
    2019 Colorado ZR2


  8. #8
    Modular Ford Performance Wolfpack Speed's Avatar
    Join Date
    Aug 2006
    Location
    Pittsburgh, PA
    Posts
    4,321
    Quote Originally Posted by 2001GTTT View Post
    Ok im getting to the point where i am beginning to hate my car. Twice today, there is a humming/moaning type noise coming from under the hood, and the rpms dance around, between 200 to 1500, i shut it off and started it and it was fine, it did it again and i just let it go and it went back to normal.

    I have two theories on this.

    1) IAC Valve is acting up, but would this explain the weird noise?

    2) Power Steering Pump making noise but what would account for the rpms?

    Any help is greatly appreciated, thanks guys.
    dont hate your car brother, just be patient and work the bugs out! did you extract the broken iac bolt and replace it with another??? let me know if there is something i can do for you
    Wolfpack Speed, Inc.
    4290 Campbells Run Rd
    Pittsburgh, PA 15205
    (412) 279-4902

  9. #9
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by Troll View Post
    ...and this is the 2nd or 3rd time you "cleaned" that IAC valve after we told you to buy a new one AND you broke one of the bolts AND you think it's tight enough. Air molecules are really really small. I bet some of them are getting in there where the bolt is broke and the 1/2-assed so-called cleaned IAC is probably acting up.

    If I was your car, I would hate you more than you're hating it right now.

    Fix the bolt and spend $70 clams... get a brand new IAC, anchor it down correctly and report back to us.

    are you on your period or something? youve been kinda mean lately.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  10. #10
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by Wolfpack Speed View Post
    dont hate your car brother, just be patient and work the bugs out! did you extract the broken iac bolt and replace it with another??? let me know if there is something i can do for you

    thank you mike i appreciate it.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  11. #11
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    get the IAC fixed first and see where it takes you from there...

  12. #12
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    Quote Originally Posted by 2001GTTT View Post
    are you on your period or something? youve been kinda mean lately.
    no, Ed hired me to take his place when he's busy with the new bebe.

    could be your throttle position sensor, too. sometimes they go bad. somebody on here can tell you how to check it with a voltmeter and where it's supposed to be.
    2019 Colorado ZR2


  13. #13
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by Troll View Post
    no, Ed hired me to take his place when he's busy with the new bebe.

    Thanks Adam! Knew I could count on you to keep these f$ckers in line!

  14. #14
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    I think the problem is you don't have a blower, if you had a blower the noise it makes would be totally acceptable..
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  15. #15
    far from a newb!!! INSANELY CRAZY's Avatar
    Join Date
    Aug 2006
    Location
    out in the woods
    Posts
    4,948
    turn your radio up really loud... that usually fixes any issue,LOL....
    ridin fast,hittin da hills,throwin some dirt

    2003 polaris predator 500

    (wanna ride,just pm me!!!)

  16. #16
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    while the last two suggestions are obviously great ones, they are unacceptable at this time. lol
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  17. #17
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    I have heard the pcv valves make some funny noises before...
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  18. #18
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    did it again and i was in a bad mood and got pissed so i put it in neutral and let hit 5k a couple times.....it went away.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  19. #19
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Quote Originally Posted by 2001GTTT View Post
    did it again and i was in a bad mood and got pissed so i put it in neutral and let hit 5k a couple times.....it went away.
    this might lead ya to fix the problem by needing to buy a 5.4 and put a tt kit on it

  20. #20
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by scott5 View Post
    this might lead ya to fix the problem by needing to buy a 5.4 and put a tt kit on it
    thats my dream setup...we'll see what summer brings
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

Similar Threads

  1. Top ideas
    By thaley21 in forum General Tech
    Replies: 10
    Last Post: 03-16-2011, 11:51 AM
  2. any ideas?
    By 08stangftw in forum The Bar
    Replies: 3
    Last Post: 06-04-2010, 02:16 AM
  3. Need some ideas here?????
    By 1994cobra in forum Drag Racing
    Replies: 16
    Last Post: 06-05-2008, 11:15 PM
  4. Ideas on a tune??
    By v6mustang01 in forum Fox-SN95
    Replies: 6
    Last Post: 06-01-2008, 07:15 PM
  5. any ideas
    By cc4x4rider in forum General Tech
    Replies: 8
    Last Post: 07-29-2007, 11:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •