Its Done, New Combo Update

[Rio94gt]

As could be seen from my sig ive been putting together a new combo over the winter. Took some time for planning and figuring out all what had to be done. I also addressed all problems from the past year including:

Problem-lifting heads
Solution- ARP head studs

Problem-blowing fan fuses
Solution-70 amp relay

Problem-converter failing to lock up
Solution-sent back to edge for rebuild

The new combo details:

Swapped stock e7 heads for GT-40 irons (ported by Timmy :))
Swapped stock cam for Anderson B-21 cam
Switched to 1.7 RR
Converted to 75mm Fox TB setup
Changed stall from 3200 to 3800 RPMs

Made about 450 RWHP last year This year enter guess here
Best ET last year 11.29 This year enter guess here

I will have some updated photos before friday
I will have dyno results friday. SGS appointment at 1 PM
Wish me luck.

[White5.0]

nice! your car will def wake up with the ported gt40's and cam. good luck with it and keep us updated!

[yeahloh95]

my guess dyno won't show a big improvment, because of the looser converter, but the time slip will .

[383taman]

I agree but should show a much stonger torque curve.

my guess dyno won't show a big improvment, because of the looser converter, but the time slip will .

[gmkillr]

As could be seen from my sig ive been putting together a new combo over the winter. Took some time for planning and figuring out all what had to be done. I also addressed all problems from the past year including:

Problem-lifting heads
Solution- ARP head studs

Problem-blowing fan fuses
Solution-70 amp relay

Problem-converter failing to lock up
Solution-sent back to edge for rebuild

The new combo details:

Swapped stock e7 heads for GT-40 irons (ported by Timmy :))
Swapped stock cam for Anderson B-21 cam
Switched to 1.7 RR
Converted to 75mm Fox TB setup
Changed stall from 3200 to 3800 RPMs

Made about 450 RWHP last year This year 483rwhp
Best ET last year 11.29 This year right behind gmkillr

I will have some updated photos before friday
I will have dyno results friday. SGS appointment at 1 PM
Wish me luck.

[/QUOTE] Switched to 1.7 RR [/QUOTE]

Thanks Robert!!

[Killercanary]

Sounds good Billy. What made you stick with an iron GT40 head though?

[Rio94gt]

Sounds good Billy. What made you stick with an iron GT40 head though?

Money was a big issue. Also didnt want to put a nice aluminum head on there only to grenade the motor and ruin them.

Technically i can still say its a stock cobra motor with a lil cam in there.

[scott5]

sounds like a nice setup..

How that fox tb set up work out for ya?

[Rio94gt]

Had to modify the fox vortech discharge tube and find some bolts and such but other than that worked fine. Much cleaner, much more room. I would suggest this conversion to any 94/95 owner.

[gmkillr]

Had to modify the fox vortech discharge tube and find some bolts and such but other than that worked fine. Much cleaner, much more room. I would suggest this conversion to any 94/95 owner.

How did Mike end up cutting that discharge tube? A bandsaw, hacksaw, or what? Throw up some pics man, but first wash that damn engine bay!
Mike does great work, huh?
BTW, I'll be dropping your race fuel off about 12:45-1:00 today @ WolfPack so you can come get it any time after that.
I can't wait to see your new # on Friday!
Did you see my guess above?
483 rwhp

[Rio94gt]

HAHA yeah pretty funny. whered you get the 3? Usually whne i guess i round up to 5 or 0. hahah

Mike did help me out alot. Youd have to ask him how it was cut.

[Rio94gt]

Wash engine bay. hahaha. You know how i roll.

[gmkillr]

Wash engine bay. hahaha. You know how i roll.

ALL go and no show!!!!

[Rio94gt]

You know it. Ill clean it up tomorrow. Not too much water. You and i know what happend the last time. Um why isnt my water pump working?

[mineralrob]

Good luck on the new numbers:D

[Viper_ed]

Sounds good Billy. What made you stick with an iron GT40 head though?

Money was a big issue.

Thanks Ed for the deal

[Rio94gt]

Dont worry buddy. I was going to issue thank yous after i posted dyno numbers to everyone who helped get it together.

[TJH64]

That thing is going to be stout. Nice work! It's cool seeing all these 94/95 models having work done to them. Good Luck with the dyno time.

TJ

[gmkillr]

That thing is going to be stout. Nice work! It's cool seeing all these 94/95 models having work done to them. Good Luck with the dyno time.

TJ

We do have alot of sweet azz 94-95's on this board!
How many total?
1. Gmkillr
2. Rio94gt
3. Killercanary
4. TJ64
5. Troy
6. Dan 95riosnake
7. 94Cobra Bob
8. TylerStepp
9. schiavan8241
10. ????

I'm sure there's more but it's 2:10 am and I cant think of anymore.

[Rio94gt]

Tyler??. The white one that Mike did.