car problem help!!!

**chuck94** · 05-10-2008, 09:09 AM

make a long story short i bought a stang with some mods that was missing a bit not firing on 2 3 and 5 cylinder so i tore it down it had a blown head gasket between 2 and 3 cylinder and number 5 had a burnt valve so i bought some h.0 heads off 393 rag they looked really good well i put it together all cylinders are good but number 5 is dead plug has no gas smell looks like new i put new plugs wires cap rotor button still number 5 is dead any suggestions? could it be a clogged injector it got 24# in it let me know what i should proceed with gettin ready to tear it back apart soon

**Rodeheaver's** · 05-10-2008, 09:58 AM

Check for spark, fuel, compression, if that cyl had a burnt valve before i would check for a wiped lope on the cam in that cyl... Or a vaccum leak on that cyl..

**wick** · 05-10-2008, 10:36 AM

Sounds like no fuel.

**chuck94** · 05-10-2008, 10:54 AM

gonna pull injectors out here in a little bit any suggestions on how to clean em or if i can?

**chuck94** · 05-10-2008, 08:25 PM

i did a compression check on number 5 cylinder it got 150 lbs in the cylinder still dead!!!! any suggestions thanks alot

**wick** · 05-10-2008, 09:43 PM

PM returned...

**mhuckabee** · 05-12-2008, 11:00 AM

Put a noid light on the number 5 injector plug to make sure the injector is getting its pulse. I had a dead cylinder once caused by a bad connection between the wiring harness and the ECU.