Results 1 to 6 of 6

Thread: Wanted: Hood thingys

Hybrid View

  1. #1
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754

    Wanted: Hood thingys

    I am not sure what they are called, but they are round rubber circles that mount to the support rail in front of the radiator. There is 1 on each side and they are located about 6 inchces on either side of the support bracket that holds the top of the radiator (see picture below)

    Anyone have 2 of these? Mine are missing and my hood will not line up correctly. Let me know what the name of this part is and how much. THanks

    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  2. #2
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    Part Number PE941 over at LMM is the hood bumper kit with adjustable stops. It's like $16 or you can get just the adjustable stops for $6 each part number PE784.

    PE784

    http://www.laurelmountainmustang.com/pe784.jpg

    PE941

    http://www.laurelmountainmustang.com/pe941.jpg
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  3. #3
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by ArmyWarrant View Post
    Part Number PE941 over at LMM is the hood bumper kit with adjustable stops. It's like $16 or you can get just the adjustable stops for $6 each part number PE784.

    PE784

    http://www.laurelmountainmustang.com/pe784.jpg

    PE941

    http://www.laurelmountainmustang.com/pe941.jpg
    Thanks for the quick reply. I have the bumpers going up the sides so I don't need the whole kit, just need the adjustable stops.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

  4. #4
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    no problem, I had to get the same things for my 88 vert when I had it and remembered that I got them from LMM
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  5. #5
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    Quote Originally Posted by RUSH2112 View Post
    Thanks for the quick reply. I have the bumpers going up the sides so I don't need the whole kit, just need the adjustable stops.
    Dude, the one lmm makes are made with ford tooling i think, that means awesome fitment!!! i would get them all new just because its cheap and they will look fresh and clean...
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  6. #6
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    Quote Originally Posted by Rodeheaver's View Post
    Dude, the one lmm makes are made with ford tooling i think, that means awesome fitment!!! i would get them all new just because its cheap and they will look fresh and clean...
    I ordered just the front adjusters. The side ones seem to be fine, plus they are already broken in and mate well with my aftermarket hood. The only issue I have is the front of the hood needs lined up, so the adjusters will fix that.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

Similar Threads

  1. Wanted 99-04 hood
    By mustang50lx in forum Ford Parts
    Replies: 0
    Last Post: 08-21-2011, 12:02 AM
  2. hood wanted
    By cemnt guy in forum Ford Parts
    Replies: 4
    Last Post: 04-27-2011, 12:13 AM
  3. Wanted: A fiberglass hood for 87 - 93 Mustang
    By Sonic03snake in forum Ford Parts
    Replies: 6
    Last Post: 09-03-2010, 12:27 AM
  4. 2.5 Cowl hood wanted
    By gmslayer in forum Ford Parts
    Replies: 4
    Last Post: 12-14-2009, 05:28 PM
  5. Wanted stock hood for 89 gt
    By mildew in forum Ford Parts
    Replies: 3
    Last Post: 08-15-2009, 05:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •