NEED SOON! flywheel for T5 ASAP!

[95riosnake]

I'm putting in a new clutch on Sunday morning, and as you all know, the flywheel will need to be resurfaced. Due to some time constraints, I won't have time on Sunday to pull the flywheel, have it cut, then put it all back together.

I need a flywheel to go have resurfaced asap so I can have it resurfaced on saturday and ready to rock on Sunday morning.

If anybody has one I can pick up, please let me know. On a related subject, does anyone know what ounce flywheel I need for a stock T5 in my 95 cobra? That is what I will need.

Thanks in advance everyone

[blizzard]

the balance matches the damper. and i'm fairly certain most late model 5.0s were 50? i switched to 28 with the 2A crank, or i'd have one for you :(

[95riosnake]

the balance matches the damper. and i'm fairly certain most late model 5.0s were 50? i switched to 28 with the 2A crank, or i'd have one for you :(

I'm 99% sure it's 50 oz then, the car still has a stock damper on it. I was pretty sure it was 50 but didn't want to go through the trouble of getting one only to find out it was the wrong one. Thanks for the response

[stangfever]

i have one. give me a pm ,if ya want it make offer its yours ... it will need resurfaced

[95riosnake]

i have one. give me a pm ,if ya want it make offer its yours ... it will need resurfaced

pm sent

[95riosnake]

TTT

stangfever is all the way in uniontown, if anybody closer (in the immediate pittsburgh area) has one please chime in. If not, I'll bite the bullet and drive to uniontown to get his.

[95riosnake]

Thanks for the flywheel and tranny mount Mike!

[stangfever]

anytime glad i could help

[fastfox91]

i have one that was resurfaced and has less than 600 miles on it and its 50oz let me know if u are interested

[95riosnake]

i have one that was resurfaced and has less than 600 miles on it and its 50oz let me know if u are interested

I already bought the one that stangfever had, thanks though