Dyno numbers

[Troll]

somebody gotta have a laptop and hook-up at the hotel... WTF?

[Rio94gt]

I know the results but im not stealing robs thunder.

[Viper_ed]

I know the results but im not stealing robs thunder.

Yep, let's just say that there are 2 people that guessed it within 3 HP.

[blizzard]

??? the suspense is killin' me

[v6mustang01]

Yea this is more exciting than hilary and obama!!! lets hear it!!! sumone give it up!

im guessin 433rwhp and 442rwtq!

[Troll]

I know the results but im not stealing robs thunder.

Are the heads still sealed tightly against the block?

[DMmustangLX]

400 hp if ur lucky stock heads arent going to help my buddy has a 90 5.0 with ported stock e7 heads just a cam swap and head work and he only made 350 at the real wheels with a 8 psi supercharger

[PunisherStang]

im gunna say its def in the 400s, only about 3 people guessed in the 300 range i believe and 20 guessed in 400 range lol.

[coralcoupe1993]

Hum.... Im not very good at this but I will take a stab at it.

397 or 399.

[wick]

Allrightie. There were a few issues. My rev limiter was set to 6000. It cut out at 5100ish. Had some belt slip. Now, the good news, I drove it home. HAHAH he other news is also good. I am more than happy. With a stock motor basically and not spinning it as high as I would have liked, it made


397.66 Horse
397.72 Torque.

Both at the limiter and still climbing. There was a dip at 49 where some belt slip interfered but it took back off. The curves were excellent and kept climbing. Dave said there is more in it if we would have went past the limiter but it was not really said until after the straps were comming off. I can honestly say, I am happier than a mother effer though. I have driveability and a good tune. No more stalling and the BS issues associated with not having a tune. He could have pulled more but I was not going for a dyno shoot out, I wanted safety and driveability which was achieved.

[94Cobra]

Congratulations Rob. Glad to hear you are happy with the results. Nothing left to do now but enjoy it.

[scott5]

congrats

[Troll]

good to hear, Rob. 400hp at the wheels is a fun vehicle no matter what. have fun with it. Isn't the couple hundred bucks worth it to talk to Dave Guy for 15 minutes?

[gmkillr]

Allrightie. There were a few issues. My rev limiter was set to 6000. It cut out at 5100ish. Had some belt slip. Now, the good news, I drove it home. HAHAH he other news is also good. I am more than happy. With a stock motor basically and not spinning it as high as I would have liked, it made


397.66 Horse
397.72 Torque.

Both at the limiter and still climbing. There was a dip at 49 where some belt slip interfered but it took back off. The curves were excellent and kept climbing. Dave said there is more in it if we would have went past the limiter but it was not really said until after the straps were comming off. I can honestly say, I am happier than a mother effer though. I have driveability and a good tune. No more stalling and the BS issues associated with not having a tune. He could have pulled more but I was not going for a dyno shoot out, I wanted safety and driveability which was achieved.

Where were the peak #'s made? Can you post the graph?
What were your initial #'s?
Congrats on finally getting this thing tuned!

[blkp42e]

Mustang Dyno, im saying 395 whp

damn i was close

[blizzard]

i wasn't far off either. tho i'd like to see another pull above 5100... what's up with that anyway? ignition breaking up? anyway, get those heads fully ported and you'd see a lot more power ;) :D

[wick]

Thanks guys. I am going to have a different set of heads hopefully of the aluminium variety come next spring that will more than likely be stud mounted to an engine with 5.4 liters of displacement and 9.0:1 compression.

Rob, I dont know how to do the graph scan to post it. The peak was still comming up. Dave figured it was safe and good enough where it was seeing as the situation I am in...Being married, having a son and such. I did not want to break it.

Adam, Dave is a character man!!!!! Had a good time with his and George. Heck, Dave handed me a bottle of KY warming to take with me into the office with George. HAHAHAHAHAH He took it real easy on me. HAHAHHAHAHAHHAHAH

The limiter was what was cutting it out. They are so inaccurate. My buddies does the same thing. Its about 800-900RPM off.

[Viper_ed]

Dave figured it was safe and good enough where it was seeing as the situation I am in...Being married, having a son and such. I did not want to break it.

OK, everyone say it with me:

P U S S Y!!!

[Rio94gt]

OK, everyone say it with me:

P U S S Y!!!

HAHA

So, Whoes all in the race now to see whoes block goes boom first.
Me
GMKILLR
Viper Ed
Any other takers? (Wick if he had some nuts)

[gmkillr]

HAHA

So, Whoes all in the race now to see whoes block goes boom first.
Me
GMKILLR
Viper Ed
Any other takers? (Wick if he had some nuts)

Wouldn't Viper Ed actually drive or race his car to blow it up?
X2 on Wick!