any guess on my 1/4 times?

**PunisherStang** · 06-11-2008, 09:44 PM

ok so getting ready to go to prp in the next few weeks for the first time, ill be running on street tires 295-35s on the rear. im sure half of the board knows what i have but for those that dont here goes for the 10000000 time lol.

gt block bored .30 over, mahle forged pistons, rods, fully ported pi heads w/ new valves, crower valve springs, crower stg 2 cams, u/d pullies, cai, 70mm tb an plenium, 1.5 intake spacer, hooker long tubes an o/r x-pipe, slp 1 catback, 4.10s w/bearing an seal kit, sct2 programmer, eibach sportline springs, and i believe thats all i can think of off the top of my head but you guys know the general stuff.

oh an the car is an 01 gt, auto for those who dont know

thanks, an lets here your thoughts, guesses, an predictions.

**Slow01GT** · 06-11-2008, 09:52 PM

I'm gonna say 12.80's at around 106 mph.

**MBH** · 06-12-2008, 01:49 AM

That sounds about right at a good track. I figure your car is quicker than a stock auto mach 1 (by how much, I don't know), but from my understanding, prp may be a different story. Let me know when you want to go & I'll head out with you. I had fun doing it tonight

**2001GTTT** · 06-12-2008, 01:50 AM

I have faith in you punisher! lol

12.58.

**PunisherStang** · 06-12-2008, 02:30 AM

That sounds about right at a good track. I figure your car is quicker than a stock auto mach 1 (by how much, I don't know), but from my understanding, prp may be a different story. Let me know when you want to go & I'll head out with you. I had fun doing it tonight

what did you end up running w/ the black bear?, and its july 2nd, and were heading up around 2pm. oh an anyone else is more than welcome to meet up an head out with us, or if you wanna meet at track that would be cool, to actually meet who i talk to everyday in person would be awesome.

I have faith in you punisher! lol

12.58.

YES!!! im liking those numbers, if i get those numbers ill poop my pants haha jk.

**PunisherStang** · 06-12-2008, 02:32 AM

I'm gonna say 12.80's at around 106 mph.

i would be very happy with these numbers as well, pretty much anything in the 12s would make me happy.

any tips for the track?

**2001GTTT** · 06-12-2008, 02:34 AM

Originally Posted by PunisherStang

i would be very happy with these numbers as well, pretty much anything in the 12s would make me happy.

any tips for the track?

dont go to far past the staging lights....lol......it looks real gay unless you did it while doing a massive burnout.

make sure ya heat em up reallll good, with 4.10s and prps track i doubt youll hook.

**PunisherStang** · 06-12-2008, 02:39 AM

i hook exceptionally well on the street with little to no spinning at all w/ the new nitto invos, but i know that the track is completely diffrent from what everyone tells me.

**John4cam** · 06-12-2008, 06:52 AM

My vote is 13.30's @ 104 mph on the street tires.

**scott5** · 06-12-2008, 07:46 AM

i am saying 13.0 to 13.3s.. unless you get some drag radials.

**mineralrob** · 06-12-2008, 10:17 AM

Yea i wouldnt put your expectations to high especially on a street tire. Either way goodluck.

**SonofaBish** · 06-12-2008, 12:45 PM

get a high stall converter - that should help out your times drastically....

Also, why did you get a forged motor? future plans for FI or nitrous? When you forged it, did you make it a high or low compression? That could make a big difference as well

**MBH** · 06-12-2008, 01:13 PM

Originally Posted by PunisherStang

what did you end up running w/ the black bear?, and its july 2nd, and were heading up around 2pm. oh an anyone else is more than welcome to meet up an head out with us, or if you wanna meet at track that would be cool, to actually meet who i talk to everyday in person would be awesome.

lol, the meat wagon ran 18.5 @ 74

If you wanna go next wednesday night I'll go with you. I had a great time last night and even though I was driving that big turd.

hell, i kinda want to go again tonight

**PunisherStang** · 06-12-2008, 01:31 PM

get a high stall converter - that should help out your times drastically....

Also, why did you get a forged motor? future plans for FI or nitrous? When you forged it, did you make it a high or low compression? That could make a big difference as well

i plan on getting tranny built very soon, and as for the forged motor, i had full bolt ons an then i had cams put in an i upgraded the valve springs and the one valve spring was defective an snapped inhalf when i took my car out one day an dropped a valve, messed up 2 pistons, an chipped a piece off of one of my heads. so while it was apart i just had it done the way i would have done it down the road anyways, but it just happened a little sooner. its high compression a little over 10-5-1.

lol, the meat wagon ran 18.5 @ 74

If you wanna go next wednesday night I'll go with you. I had a great time last night and even though I was driving that big turd.

hell, i kinda want to go again tonight

Today 11:45 AM

hey 18.5 isnt bad for a v6 tank!!! lol ill have to check on my schedule an ill throw u a text or something. will you be taking the big red machine next time? (an no im not talking about WWE KANE lol)

**PunisherStang** · 06-12-2008, 01:33 PM

Yea i wouldnt put your expectations to high especially on a street tire. Either way goodluck.

thanks!!,an i know not to set my expectations high, but its nice to set your bar high an have confidence in yourself even though i might not get in the numbers i want due to the street tires.

**MBH** · 06-12-2008, 01:39 PM

lol the hummer is an inline 5, and next time I go I'm definitely bringin out big red. Lemme know about your schedule. I probably won't be able to go tonight since a good friend is turning 21 and he'd rather go to the bar than the track (can't say I blame him). Saturday we're all going out for his birthday and my girlfriend is coming to visit me from friday-sunday so I can't go this saturday. Like I said, just let me know