Due to recent car troubles with my daily driver, coupled with some other external pressures, I'm selling my project.

The chassis is a clean title 1990 LX 5.0 black convertible with a roll cage already installed (it was the vert that cam99 owned). At this point its a roller. Previous motor was a carb'd 460 IIRC before that was sold and I decided to fit a 94 v6 with manual trans into it.

Car right now isn't running, but the chassis is solid. Subframes welded in, cage as I mentioned, fuel cell installed. Has a stock black hood on it and paint is good for a 28 year old car. Stock radiator in place. Rear suspension is stock, but it still needs the quad shock on each side and a new set of rubber to be roadworthy. 4.10 gears out back. The drivetrain is complete including driveshaft, so you can either finish hooking up my motor or put your own one in. Accessory wiring (lights, turn signals, backup lights, taillights, etc) is intact. You can continue my project or put your own motor in.

The motor is a 1994 v6 engine with 70k miles on it, a T5 manual transmission for the v6. I also have a pair of split port heads from a 97 windstar that I had planned on having machined and installed, and the upper and lower intake from the windstar.

The first person with $1500.00 can take everything, and, I will also throw in an automatic trans for the car so that you can have your choice of transmissions. The pedal assembly is currently set up for automatic but I have the manual pedals already purchased and can be installed.

PM with any questions. Pics can go up as soon as I get in contact with cam99 as the project is in pittsburgh not philly.

I will consider selling the roller separately (lowballers need not PM), but since the motor/trans is in place, you wouldnt be able to take delivery until next weekend when I can get into town to take it out.

Thanks.